Reece3000
-
Content Count
33 -
Joined
Posts posted by Reece3000
-
-
Looks great can't wait to get my b12 kit on now
-
All five stud wheel cars are PLUS, four stud ones are not.Thanks for that
-
Hi guys I'm looking at getting a b12 kit im guessing if the vr6 is plus axle my 1995 2.0 16v is not, I have tried to find the answer by searching but couldn't find anything
-
-
evening, I'm looking for a cover. Are the halfords ones much good?Hi, I got the cheaper halfords one which was no good moisture got in between an just sat on the car, I now have the all seasons one as we'll mind you mines a bit tight think I got mine a bit to small, but no complaints so far been on a couple of months in the rain and wind but I do put my cheaper one over the top just to stop all the bird crap getting on the better one as I keep it under tree's
-
Wouldnt halfords do some?Not that I can see, the bit I'm after is like this http://www.ecstuning.com/Volkswagen-Jetta_IV--1.8T/Engine/Electrical/ES336433/
-
Hi guys, I'm just after some where to get a t clamp for the negative terminal to the battery, I've found them on ebay from international sellers but would prefer to get it from England just so delivery time is quicker. An also is the negative t clamp a different size from positive?
Reece
-
Could I get a set rob?
-
Yer could be the same one then I usual see it near a florists near the king William pub end of kempston.
An that could definitely be useful to me thanks for the info dawn
-
I would definitely be interested in a number plate light cover also
Reece
-
Dawn I've seen the blue one in kempston as well, never in mine when I see them though an from what I've seen it's pretty standard if its the same one which is a rare thing lol
-
Spotted a red an what I think was a vr around 8 this moring in sandy Bedfordshire, same as always though, I only spot other corrados when I'm in my work van
-
I'm pretty sure these are on my corrado I've only had it a month and don't drive it daily so haven't had a chance to get a proper look, I hate them really harsh ride but I don't know how long they've been fitted, I'm currently looking at buying new ones now, I think I'm going towards the ap's from venom
-
Hi, is anybody running ap coilovers if so what are they like ride wise, at the moment I have some crappy pro sport ones that came with the rado an I'm desperate to change them for something better, as I don't think my step dad wants to hit his head on the roof as we hit bumps:lol:
-
-
Right so I've tested for spark an there isn't one coming from the ignition coil so I went to change that, an got one from europarts, but I got given a square one so took it back said it's not right they didn't believe me so I just got my money back went to gsf really helpful they found the cylinder shaped one but the one I'm replacing is an odd shape not a cube or a cylinder, my corrados a 95 valver should it have the cylinder shaped one? I'll post up a picture of the one in mine at the moment
-
Ok I'll have a look at these bits tonight I take it if it's flame trap will it be obvious, an yer the timing belt is still in place, thanks guys
-
Hi guys still new to the forum haven't posted much up as I haven't done much to the corrado yet,
So the other day I disconnected the battery to change the dizzy cap an rotor as they looked a bit old an my plan is to work my way through sorting changing and replacing bits.
When I went to put the battery back on the alarm woke up and immobiliser done it's thing and wouldn't let me start, so I had a guy come and sort that out an take the alarm out completely but as I was turning the key for him so he could work out whatever wires he needed to cut something went bang as the engine turned over, now I've checked the leads an I'm sure actually pretty certain there in the right order but I could be wrong,
So could this be ignition coil or starter motor or something else? An if so how would I check these things.
I'm no mechanic but I do give things a good go, but I'm thinking this may be out of my depth
Any help you guys could give would be great oh and it's a 2.0l 16v
Reece
-
What did u use to black them, tint spray ?Would u do 25posted?
I just primed an gloss black rattle canned the chrome bits I didn't tint any of the lenses
An yer I'll take 25 posted
-
You'll need to put a price on these lad or admin will take the ad down.Thanks again!! Just edited
-
Selling these rear lights, the chrome was chipping an looking crappy so I've blacked the chrome bits out could do with a touch up as the bit between red lense an clear lense isn't as good as it could be
Open to offers
Can collect from bedford or I'll post them
List Date: 5/10/2014
For more info, click here to view the original listing: Rear lights
--------------------------------------
SOLD
--------------------------------------
Mobile friendly version: Rear lights
-
I think Inpro make them.Thanks for the info!
-
-
BNIB bilstein b12 pro kit for valver
in Parts for Sale
Posted · Edited by Reece3000
As title says I have a brand new bilstein b12 pro kit for sale, was going on my valver but I'm selling it to get a bike now
£500.00
Collection only from bedford