bristolbaron

Great work!! Behind the fencing and everything and you chose a pretty sexy pig. I'm happy.

Cheers! I sold them last year for about £850 from memory. You always get people start at £1k+ but they seem to sell for £700-900 dependant on condition. Check eBay.de too, could get lucky there.

I'll make your life easier, you can start with one of these from a wedding last year.. if you cant make a decent shot out of them i'll be very let down!

If you are, and these are any good to you reply here & pm me an address and i'll post them out to you. I was gonna chuck them in the bin, but thought i'd check first! Baz

They do come up in friendlier sizes from time to time, just keep an eye out. I've done a lot of experimenting with wheel widths and would only just about recommend a 9" rear if you're prepared to drop low and cut arches. Otherwise 8's are your limit. 10 is insane and only to be attempted by very few!

http://www.cheesylookingguysthathavesexwithpigs.com

I'll just leave this here.

i was talking with a friend about a similar issue with a building inspector last week. He's having a single story kitchen extension, but because in theory someone could build a second story on top in the future he has to have foundations to allow for this. The neighbours who did the house opposite last summer didnt need this, but recent regs meant he has to spend thousands more!

if you send VR6 a photo of you having sex with some bacon im sure he'll change it.

Hello bud, sorry this is looking more difficult than we thought to sort out! Heres the info about how to tumble the locks, and also a thread about where to get spares.. dave16v had some according to that link, perhaps he'll advise on here if he still might? Wiki article Thread about parts If you're signed into vagcat theres an etka link on there, it shows all the parts needed but also lists a repair kit? http://www.vagcat.com/epc/cat/vw/COR/1995/76/56/848348/

nah. im waiting for you to squirt your baconaise in my cumberland ring. :norty:

bttt

still required, i have one on back order with tps but its taking aaaaaaaaages!

bttt

I have for sale a set of 17" Porsche Cayenne Multispokes 7.5" Width 5x130 ET53 front & rear Very good condition, no kerbing, slight surface scratches from storage. I have a set of these in cream on my Corrado, I might end up keeping these and selling the cream ones, but as these are off the car they can go up for sale first! I'm advertising at £320 delivered nationally, will sell for £300 collected from Bristol. I will include centre caps, but they haven't arrived yet! If you have something interesting to swap/px please let me know! Cheers Baz

10" rears, not a chance without majot rear arch work. I had 8.5 & 9" futuras, and they do fit with arches cut, just.

vinyl is not the answer. it can look good from a distance, but even good wraps dont look great up close. i've only seen a couple that were flawless and even then i expect there was things i didnt notice. great if you want a different look for each show, or for launch event type use like bmw are currently doing, but not suitable as a longer term or daily option. you also have to have perfect paint underneath, any scratches/dents/rust spots will show and look more obvious than before. paint is all about prep.

wow, i thought you were a lifer! very good going to have used as a daily for that long, have you gone for something else exciting as a replacement? hows the shop? i was going to get in touch soon, a friends looking to get something sorted. baz.

im pretty sure you guys arnt into mens baps receiving meat either! may as well have a sneaky rasher if you're gonna watch that!

Meat Ship!

I still have one of these in my car. Pretty old now but great units, I'm almost tempted to make an offer to keep as a spare! Glws

i went for a new stanley blade not in the knife. tighten a jubilee clip where you want to cut so you have an edge to go against. this will get you most of the way around, loosen and retighten so you can do the bit where it does up.

100% WRD's.. i nearly bought them before bill did!

ha! actually laughed out loud!

Gavin, do you also do chips in windscreens? Nice job on the steering wheel.