Anton Sobriquet
-
Content Count
329 -
Joined
-
Last visited
Posts posted by Anton Sobriquet
-
-
If there's one left, I'll take it.
-
225x40x16s
in Wanted
Hi Stuey
Thanks, mate. Noted.
-
225x40x16s
in Wanted
Hi Tom
Thanks for that, mate, I'll bear it in mind.
-
225x40x16s
in Wanted
Hi all
Looking for used 225x40x16s in any condition. Don't need to be legal, just for a trial fit of some wheels.
A single tyre would do, a pair would be ideal, but willing to consider any number.
If anyone's got a decent set of four I would also be interested.
Cheers.
Anton
-
I have both a Corrado VR6 and a Mk3 GTi 16V rear beam next to each other in my garage - exactly the same width.
Both for sale but I'm even further away in Cambridge.
-
Hi
I have an airbox and a mint leather OEM steering wheel, mate.
LMK if you're still looking.
Anton
-
I can probably help you out in a couple of weeks when I swap my 02A for a 02J tower. I'm just not exactly sure at the mo when the job will be done.
PM me so I've got your details then I can let you know when mine's available. No probs if you've found one elsewhere in the meantime.
Cheers.
Anton
-
Going to post these on Parts FS.
-
Sorry about the delay getting these posted up...
[ATTACH=CONFIG]45965[/ATTACH]
[ATTACH=CONFIG]45967[/ATTACH]
[ATTACH=CONFIG]45968[/ATTACH]
[ATTACH=CONFIG]45969[/ATTACH]
They are in black with a faint purple pattern out of a late VR6 and are in absolutley mint condition. The door cards and passenger & back seats look and feel like new. Driver's seat has a small mark on the backrest, which I've tried to illustrate, and one or two very faint marks on the seat you can hardly see. Probably come out with a bit of shampoo.
My camera is crap but I can try and take more pics, if required.
No idea what they're worth at all, so let's say £325 ono to comply with forum rules, although you're welcome to pay more if you want. I would think you're unlikely to find anything else as good let alone better. Make me an offer if you're interested, otherwise I'll try them on a FS thread / eBay.
I also have a mint black dashboard out of a late VR6 with all the bits except fasteners and VR6 clocks. I do have 16V clocks.
Cheers.
Anton
-
Sorry for delay my end.
Having problems getting logged in.... getting as far as this is miraculous..... I sign in - I get the welcome screen - I try to post - I'm told I'm not logged in - round & round & round we go.......
Will try uploading pics AGAIN!!
Is it me or is it this new forum software?
-
You can borrow mine, mate. It's a hydraulic 3 ton Clarke crane. I'm in the centre of Cambridge, if that's close enough.
PM me with your 'phone number if you want to take it up.
-
I have late VR6 black cloth seats (rear hump) with door cards. The ones with a feint purple fleck. They're in absolutely mint condition. I bought them from a forum member for an abortive project and coincidentally thought to myself only the other day I should really get my a**e into gear and get them sold.
If you're interested, I'll get them out of their plastic covers at the w/e and up some pics for you.
-
Hi
I've got some of the polybushes, tho' not sure which - I'll check. Also have a VR6 front cross member, if that's any use?
-
The aluminium 20V Mk4s are the caliper of choice and can be had for about £40-50 from the scrappie. They'll plug straight in using a Goodrich Mk2 to Mk4 conversion line kit. They're the same as Mk3s, but they're aluminium not steel.
I've had a set on for about 18 months with no probs at all.
-
Mine arrived safely this morning.
Many thanks for your hard work, mate.
-
Just Paypal'd £22 for my 8 rollers.
Sorry for delay.
Cheers.
Anton
-
Can I order 8, please, or am I too late (again)?
-
45 quid, mate, which is what I paid for it, incl. postage. It's brand new.
-
I got the Xenon dips upgrade on mine. Total transformation. Absolutely brilliant now.
Hence, I have for sale an uprated headlight loom,if anyone's interested. Never actually got around to fitting it, but it's the one that used to appear as a sticky on Parts: http://the-corrado.net/.archive/forum/viewtopic.php?f=13&t=96184
Have to agree that projector angel eyes look pants on the car. DO like the audi conversions on Dubdesign A LOT, tho'. I did start to have a go at it but had to put it aside when life suddenly got frantic. Hope to complete that little project sometime.....
-
Managed to dig out the manual. For future reference, if anyone's interested, just tape over the clear wedge shaped section of the headlight lenses that point to the left. Works a treat and my xenons gave me more than adequate lighting.
Just don't use gaffer tape, as I did. The heat melts the adhesive, which tries to weld itself to the glass and is a c..t to get off! Insulation tape instead, as the man suggested.
-
Unfortunately, the instruction manual is locked away in storage while I'm renovating.
If anyone has theirs to hand or has a good memory, could they please post up the instructions?
-
I was hoping I could just fiddle about with thr adjusters when I get there. Better find a Halfords en route.
Yeah, bit of an expedition. Worst of it is I have to do Cambridge - Blackpool - Dover first. I'll end up having done over 2000 miles by the time I get back
-
Need to make an emegency trip to Ancona to collect stranded wife.
Anybody know whether I can adjust headlights for driving on the right, or do I need to get those plastic stick-on converters?
Also, any tips re speeding issues etc would be handy. My route will take me through France, Switzerland and Italy:
Calais - St Quentin - Reims - Metz- Strasbourg - Mulhouse - Basel - Luzern - San Gottardo tunnel- Lugano - Milano - Bologna - Ancona
No idea how long it might take but I'd guess 12-16 hours depending on opportunities.
-
OK, I'll get some pics taken. Better start a FS thread, I suppose.
£75 is just from memory, tho'. I'll have to dig out the invoice.
Recommendations for archwork Cambridge area?
in Suppliers Forum
Posted
Hi all
Wondering if anyone can recommend a good quality bodyshop up for mods anywhere around the Cambridge area.
Looking to get some fairly serious archwork done.
Cheers.
Anton