swampy
-
Content Count
324 -
Joined
Posts posted by swampy
-
-
Got one of these ready to go
-
down to 8 pairs
-
Hi odd question
But
Can any confirm if the ball joint pinch bolt is the same on the corrado as the mk2 or 3 golf
-
8 sets left
-
A2 have run the same spec on my own car over the last ten years with no issue
-
Any chance of a picture of the bolts?will be the same as these
-
Well, the head came off the bolt. It seems to still be holding.. for now.but for how long?
you know you will end up with an emergency repair when you need it the least
at least if you have the bolts to replace you can do them at your leisure
-
even more reason to buy new ones!I might be interested. If only I could get my bloody old ones off.. Already sheared one.how else are you going to secure the inlet again??
-
you all know i do these
but i am now down to the last ten sets at this price, once these are gone the price will be going up by around £10 per pair!!
so if your doing this over the winter buy the lines whilst the price is low.
the price will be going up as the cost to have the ends made has gone up.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121013976791&ssPageName=STRK:MESE:IT
-
having read many threads on here about people changing the inlet manifold and having trouble with the old bolts i have done my research and can now offer them.
i know these fit the above car, am sure they will also fit many other years .
anyway all of the bolts will be stainless steel so can be polished up to a mirror like finish
in the set you will get
qty four bolts from tb to manifold
qty 9 bolts to connect the two halfs of the manifold
qty 9 bolts to connect the lower part to the cylinder head
22 washers
£10 the set delivered
-
All orderd up and being made
-
I was always led to believe that both sides should be adjusted by the same anount
-
after several enquiries about these and then a few sold and fitted i can now offer these to you
stainless steel braided hose mild steel ends
direct replacment
£30 delivered
is the actual item supplied
-
I'm assuming the mk4 calipers used are correct for the VR ????Yes afaik though I'm a novice on vw
-
I wouldn't use stainless bolts, far better off with 12.9 grade bolts which are a lot stronger
Again I can supply these along with the conversion hose
-
I got a set from machine Mart, has a holder in it that fits the 3/8 ratchet and then loads of different Allen key and torx ends you can swap over
-
I'm sure every MG owner I have ever met has said they've had the HG go at some point. You'd think they would do something about it!They have.
Well they did when they a derivative of the engine in to the free lander,they fitted spray bars to the cylinder a fairly easy mod that can be retro fitted so I am told
-
I sheared the first bolt and the rest won't budge.Now I'm stuck :(
If possible try warming the engine up, I e running it for a while
As a side note what length are the bolts?
I suspect I could supply some nice shiny stainless bolts to replace it with
-
If you get one fit the oil spray bars from a land rover discovery it helps prevent the hg going and so I'm told Is an easy modification to do
-
Can supply all specs of BRAKELINES for most of the Audi vag range plus most other makes
Can now also a braided clutch line for £30 deliverd
-
Yes mate can do most cars
They can contact me via PayPal address which is also my email
-
Received today very pleased with quality and proper length last ones were way to long and nearly killed me and a friend and this car was bought off a so called reputable forum member anyway probably a good thing he sold it because at least now it will get the care and attention to detail it deserves not some cheapskate quick fix.Not a problem!!
Have come across that problem many times, people think because you fit calipers from x car that you need to fit the lines from the same car.
When Infact you more than likely require custom / bespoke made to order items like I supply
-
That looks worth a 120 mile round trip where to exactly are these beauties jake?Ah now I see , missed your last post
They do them on the deli counter in waitross
-
Had one of these earlier and it was amazing.Black Pudding scotch egg
[ATTACH=CONFIG]70476[/ATTACH][ATTACH=CONFIG]70477[/ATTACH]
Yes they are
Morrisons do one with quail egg in the middle that's really nice
braided clutch line
in Suppliers Forum
Posted
No I haven't mate
You can't see alot of it once in