robo22sri

As title i have a pair of pioneer cdj1000 mk3 cd decks and a pioneer djm800 mixer for sale Theses are about 4 years old a little worn but all function as they should. Come with power leads only! no other leads Price is £850 collected from basildon essex Mobile number is 079 809 179 85

I got a price from felgenfuchs.de for 2 new alloy dishes to replace the 2 damaged ones and it was 260 euros posted The 2 damaged ones could be repaired though, a set of stainless bolts are about £120 But a set of 3pc mls are around £1800!

Just put an add up http://the-corrado.net/showthread.php?77854-schmidt-ml-splits They do need a slight refurb but will cost you less than the 1pc ones new!

They are 8.5 inch wide and 9.5 inch wide with 1.5 inch dishes and 2.5 dishes The ET is 5/8 not sure as the details on the stickers were sprayed over!! but i need 30mm spacers to get them to fit over my hispec 4 pots on the front PCD 5x100 The tyres are all 205/40/16 and are falken ziex 912's all have good tread and no buldges! They have been sprayed audi dolphin grey! Pic to see the colour iphone pics are a little poor Here are pics of the dishes One of the 2.5" dishes kerbed One of the 1.5 dishes light kerbing, the other 1.5 is not touched!!! This is the worse one! it has a slight flat spot from another angle You can see roughly how flat it is from the kerbing I have spoke to Mike the polisher and he said the worse one can be put in a press and strighten it up and then alloy weld the kerb mark. The barrels are still silver i was going to get them sprayed but thought it would be a waste of time and money Prices is £550 with tyres! I still have the gold bolts from splitting them but they are tatty but could be used again Collection form basildon essex

You bought a set?? or looking? I have a 3pc set for sale!

Bit off topic but why dont the garage justtake the head light and splitter etc off when spraying!! nice repair though

WTF! What an idiot! £500 plank :lol:

Just a single belt bud

These are sold to Phil at the mo until collection :)

I have both if you need them?!? Or are you sorted?

I don't know how to test them but I bought all new seeing as I pulled it all apart I paid £50 for sensors from AVS spares I bought a new blue and yellow and also rad fan switch

Will make your car run crap if split!

You need a vr one ;)

Ben i have one sitting round my mates house if he hasnt thrown it out!! but it is a little bent on the ends!

Ok Dave, it might explain why my head lights don't work properly because it's broke :lol:

I need one of them to :lol:

Yes bud :)

Thought I recognised it, yeah Tim is a top bloke I buy detailing gear of him :)

They are not bolts if that makes sense! They have a 6mm hole in them to allow the 2 studs on the rocker cover to screw in Nick are yours intact and not rounded off where the spline bit goes in?

Cheers bud, my vw dealer is 20 mins away and a pain in the back side lol

Oh a fix a piece of wood to the wall and start half way up the wall ;) Oh and if your doing dark floor and light walls do a little upstand to make a skirting :) Nice little touch

Dave have you got the 2 bolts that hold this cover on?

As title, I am after the 2 bolts that hold the plastic over the coil pack

Make sure the walls are straight! as tile adhesive is not buildable Get a rubi tile cutter 2nd hand if you can afford one ;) the best lever type tile cutter available, water cutters take to long to mess about pushing it through!! Grout small areas at time 1m sq and wipe down thoroughly as grout is pain in the arse when set! window reveals are a pain in the arse!

what a piece of ****e! ruined a good car :(