flusted
-
Content Count
2,755 -
Joined
Everything posted by flusted
-
Ive got my boost gauge plumbed in on 1 of the small vacuum pipes near the servo pipe. Just wondering if thats the right place? can anyone take a pic of where theres is plumbed in? Also can only see 1890 on mfa gauge and about 12psi on gauge. Charger has been checked and all ok,could it be due to the size of my front mount intercooler? Its a bit hard to redline in 3rd on the Isle of Wight to check boost as you run out of road :lol:
-
jets come on at 7psi
-
Problem ive incountered is after the jets have been activated,it syphons all the water out the bottle!
-
breather filter g60 plus why ditch giro valve? new Question!
flusted replied to iow_corrado_g60's topic in Engine Bay
Following on from the giro valve. I read on vortex that sns can now adjust the chip to compensate for the added boost gained by the valve? -
ABFs have good cams as standard so best leave as is
-
The wires should all be the right length to reach each 1. Post up the plug colour and wires to plug,and il pop my bonnet and tell you where they go
-
You will love it trust me
-
theres green g60 forsale on ebay thats in newport on the island
-
its a mare,you will need to change bottom arms,driveshafts,ball joints etc
-
breather filter g60 plus why ditch giro valve? new Question!
flusted replied to iow_corrado_g60's topic in Engine Bay
interesting read really -
breather filter g60 plus why ditch giro valve? new Question!
flusted replied to iow_corrado_g60's topic in Engine Bay
but 1.5 bar is about 20psi isnt it? so would be ok with a 68mm pulley? -
breather filter g60 plus why ditch giro valve? new Question!
flusted replied to iow_corrado_g60's topic in Engine Bay
so a giro valve with a rallye ecu would be ok? or a different map sensor? -
Havent dynod mine yet. FMIC was defo a good mod along with rsr outlet. I bought a universal Intercooler and made the pipes up my self
-
Yep,got a few friends with scoobs! Have you got the boost return mod and rsr? they make it sound flippin mental!
-
Hope all is ok for ya mate
-
same as mine? in all honesty, surely that is a good figure for your bhp?
-
do the mfa boost check and see what you get
-
3 IOW corrado owners in same post :cheers: It will be a 68mm pulley with those readings. Mine has 68mm and makes 1920 on mfa but 16psi on boost gauge. Your motor will already be chipped aswell no doubt. I took my ecu apart and found it had a amd chip and 68mm pulley and i bought engine standard!
-
I like
-
prob the silencer box leaking,i lost loads of boost out of that
-
£49 plus vat from gsf :cry: It is 3 wire now you mention it as it has the earth to the bracket. Can i buy the ebay 1 and just put a ring terminal on the earth wire?
-
http://cgi.ebay.co.uk/BN-Universal-4-Wire-Oxygen-Lambda-Sensor_W0QQitemZ120014908632QQihZ002QQcategoryZ72205QQrdZ1QQcmdZViewItem Mine is completly dead,will this fit and work ok? mine is 4 wire
-
mfa readings are never that accurate if thats what your going by? Mine never used to go above 10mpg cos i do short journeys
-
Turbo it and use a kstar system to run extra injectors as stealth did with there turbo conversion! I have a kstar forsale on ebay at the moment! Mini chargers are tiny and would not supply a 16v. You would need a eaton m62 from merc
-
cool,best i get 1 then!