Results 1 to 9 of 9

Thread: Acid dipped shell, roll cage, seam welded project with many carbon panels.

  1. #1
    ⋆⋆ CF Donator ⋆⋆ Graphite's Avatar
    Join Date
    7th July 2009
    Location
    Retford, Notts
    Posts
    517

    Acid dipped shell, roll cage, seam welded project with many carbon panels.

    After long consideration and a few previous nearlies, I have come to the conclusion to move my long term project on.

    Some history on the car.

    Purchased as a rolling shell from a friend, this 1990 G60 had a very good road going life. Very little damage to the shell from rot or accident damage, with one slight ding on the near side rear quarter and a slightly crushed passenger sill.
    After storing the car for some years I started to work in the indusrty, specialising in the Corrado as some of you will already be aware.

    Whilst in the occupation, I started to move this project forwards after making good friends with a contact who had a history working for professional racing teams, including the likes of McLaren GT, Audi Sport, etc. After the shell was acid dipped he commenced work on seam welding the chassis to the same specification used in modern BTCC cars, which under torque tests require 10,000+ newtons of force to deflect the shell by 1 mm for end to end, making the shell very stiff therefore very responsive.

    At the same time, installation of a MSA 2017 regulation compliant welded in rollcage (with main ROPS wall thickness of 2.5mm, manufactured by custom cages) commenced. The cage is complete in terms of main tubing, but cross bars are only tacked in place to allow them to be removed in order to easily complete the car. Both the roll cage and seam welding have been completed using both TIG and MIG processes and is very, very neat. The cage extends from the front turrets, all the way back to the rear turrets and has three cross braces, one in the roof, one in the rear, and one between the driver and rear passenger area.

    My intention was to produce one of the lightest Corrado's out there and every little peice of metal that was not neccessary has been removed. For example the seat runners are no longer in the car, as they weighed 950g each and there are four of them. I think you get the picture of how far I was looking to go. The roof skin has been removed and I have a carbon fibre replacement to go with the shell and as I was planning a RWD conversion so the rear floor pan has been removed to allow fitment of a lighter carbon panel I was going to make from carbon sheeting. So far as an estimation I would say 100kg has been removed from the shell alone.

    I pretty much got to this point and I came away from the industry for a number of reasons.

    I have the time, money, patience and tools to finish this car - what I don't have any more is the love for it, there are things I love more.
    There are so many more important things in my life for the forseeable that deserve the commitment over and above this.

    So with the story over heres the sales part:

    1990 Corrado G60 shell as description above, the shell has caught some surface corrosion, you can remove this by hand but it would be much more cost effective to have it dipped again.
    Costs:
    Dipping: £1500 inc vat
    Seam Welding: £1000
    Rollcage parts and manufacture: £1850
    Carbon Roofskin: £600
    Total: £4950

    This will also include, front slam panel, head lamps, grill, two complete doors, rear light clusters, door seals, boot seal, two refurbished powdercoated front hub knuckles, front and rear bumpers.

    For sale: £2500

    With the extra bits thrown in this I feel is a very fair price.


    Plexiglass windows set for quarter light windows and door windows, including sliding hatches in door windows.

    £200

    16v 9a bottom end with JE low compression pistons for turbo application (9:1).

    £800

    16v 9a gas flowed cylinder head, has all hardware except camshafts.

    £600

    The engine is currently split, but if someone were to want the engine as a complete, ready to go unit, I could complete the build for the cost of the required parts for you.

    All parts are to be paid for with a non returnable deposit proportionate to their value with an agreed collection date, or payment in full before collection with an agreed collection date. If you pay the deposit, the remainder is cash on collection. I will not be taking deposits to hold parts until paydays etc.

    I will accept payment by paypal, however if you want the full paypal buyers protection you will have to pay the fees.
    All parts except where stated are collection only from North Nottinghamshire, but where possible I am willing to travel a part of the way for a contribution to the fuel cost.
    Last edited by Graphite; 23rd February 2018 at 2:14 PM.

  2. #2
    ⋆⋆ CF Donator ⋆⋆ Graphite's Avatar
    Join Date
    7th July 2009
    Location
    Retford, Notts
    Posts
    517
    Pictures of the more relevant bits.

    Last edited by Graphite; 23rd February 2018 at 2:12 PM.

  3. #3
    ⋆⋆ CF Donator ⋆⋆ Graphite's Avatar
    Join Date
    7th July 2009
    Location
    Retford, Notts
    Posts
    517
    Updated a list of included items with the shell. I am open for discussion on pricing on certain components.

  4. #4
    CF-oholic! VAG-hag's Avatar
    Join Date
    1st June 2005
    Location
    Tarn!
    Posts
    5,718
    Wow!
    95 Mystic Blue Storm - It's bound to cause disappointment.

  5. #5
    ⋆⋆ CF Donator ⋆⋆ Graphite's Avatar
    Join Date
    7th July 2009
    Location
    Retford, Notts
    Posts
    517
    All carbon panels sold.

  6. #6
    ⋆⋆ CF Member ⋆⋆ Jim Bowen's Avatar
    Join Date
    16th May 2005
    Location
    Essex
    Posts
    8,739
    Good!!! Stops the temptation i had
    Just like a golf................But better!!!

  7. #7
    Newbie
    Join Date
    18th October 2017
    Location
    Finland
    Posts
    24
    That license plate holder looks superb!


    Pro

  8. #8
    Apologies for the o/t post but does anyone have any ideas what happened to all the LWS molds for all the corrado parts after they disappeared?

  9. #9
    ⋆⋆ CF Donator ⋆⋆ Graphite's Avatar
    Join Date
    7th July 2009
    Location
    Retford, Notts
    Posts
    517
    Price dropped on shell and included parts to £2500

Similar Threads

  1. WANTED: Corrado Rear Roll Cage / Show Cage
    By G60MAT in forum Wanted
    Replies: 4
    Last Post: 12th February 2015, 6:55 PM
  2. Primed Carbon Bonnet :-) and other Carbon Panels :-)
    By Andrew_LWSDesign in forum Exterior
    Replies: 17
    Last Post: 7th June 2014, 9:15 AM
  3. Roll cage
    By Chrisdub91 in forum General Car Chat
    Replies: 2
    Last Post: 8th May 2013, 3:50 AM
  4. Roll Cage
    By Big Adam in forum Interior
    Replies: 2
    Last Post: 1st July 2012, 4:00 PM
  5. what roll cage?
    By corrado_sunderland in forum Interior
    Replies: 1
    Last Post: 27th November 2008, 10:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.