Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: ABS Pump 1H2 614 217 A (VR6)

  1. #1
    Regular
    Join Date
    2nd February 2018
    Location
    Herts
    Posts
    134

    ABS Pump 1H2 614 217 A (VR6)

    Hi,

    I'm after a working ABS pump 1H2 614 217 A for a 95 Corrado VR6.

    Thanks,
    Matt
    1995 White VR6 CCGB Member 4303

  2. #2
    ⋆⋆ CF Donator ⋆⋆ lilfuzzer's Avatar
    Join Date
    25th August 2004
    Location
    County Durham
    Posts
    5,894
    I think I have one
    Chris
    93 Bordeaux Pearl VR6 'Verity'
    94 Blackberry VR6 - not anymore
    Project number 28
    94 green 8v

    previous rados
    91 Bordeaux pearl 1.8 16v
    94 Sherry Pearl VR6
    93 Bordeaux pearl VR6
    93 Aqua Blue VR6
    94 Moonlight Blue VR6
    95 Silver 16v 2.0
    95 White 8v
    93 Flash Red
    94 Classic Green VR6
    unknown blackberry VR6
    94 green 8v
    90 green 16v
    94 Black 2.0 16v
    91 Blue 16v
    91 Black G60
    94 Grey 16v
    92 green 16v
    94 Ice Violet VR6

    too many

  3. #3
    Regular
    Join Date
    2nd February 2018
    Location
    Herts
    Posts
    134
    Let me know if you do and assume it was working etc? How muchos - msg me if youíd prefer
    Matt

  4. #4
    ⋆⋆ CF Donator ⋆⋆ lilfuzzer's Avatar
    Join Date
    25th August 2004
    Location
    County Durham
    Posts
    5,894
    Hi mate unfortunately this is the number of the ones i have



    Chris
    93 Bordeaux Pearl VR6 'Verity'
    94 Blackberry VR6 - not anymore
    Project number 28
    94 green 8v

    previous rados
    91 Bordeaux pearl 1.8 16v
    94 Sherry Pearl VR6
    93 Bordeaux pearl VR6
    93 Aqua Blue VR6
    94 Moonlight Blue VR6
    95 Silver 16v 2.0
    95 White 8v
    93 Flash Red
    94 Classic Green VR6
    unknown blackberry VR6
    94 green 8v
    90 green 16v
    94 Black 2.0 16v
    91 Blue 16v
    91 Black G60
    94 Grey 16v
    92 green 16v
    94 Ice Violet VR6

    too many

  5. #5
    Regular
    Join Date
    2nd February 2018
    Location
    Herts
    Posts
    134
    Thanks mate anyway and for taking the time to look. I've no idea on compatibility between pumps so prob best i stick to my part numbers.
    1995 White VR6 CCGB Member 4303

  6. #6
    I might have one. Iíll check part numbers later for you.



  7. #7
    CF Nutter fendervg's Avatar
    Join Date
    13th June 2009
    Location
    Dublin, IE
    Posts
    1,543
    I don't think the pumps changed on the RHD VR6s - probably just a minor parts revision. Once it's got the correct number of outlets and the right loom connector socket you should be good to go. Be aware that the actual mode of failure on these is not the valve solenoid (unless extremely corroded or heavily contaminated brake fluid), but the PCB that is underneath, which can crack with heat, get dirty/wet and the loom connector disintegrates.
    ____________
    fendervg

    93 Corrado VR6
    Members Gallery

  8. #8
    Regular
    Join Date
    2nd February 2018
    Location
    Herts
    Posts
    134
    Thanks both.

  9. #9
    Got the same pump number as yours. I bought it last week for my VR6, but it turns out mines an electrical fault. The guy I bought it from assured me it works/worked.
    Upon the pump being delivered, the electric plug was damaged in transit.
    Itís not this your after is it ? You just want the pump you want. Let me know if you still want/need it. Thanks Scott.



  10. #10
    Regular
    Join Date
    2nd February 2018
    Location
    Herts
    Posts
    134
    Thanks Scott, Iím after the whole pump. Not sure which connector you mean thatís broke - I think I would need this to connect it to my car.

    Fendervg- just re-read your reply - is the circuit board on the pump or is it the abs ECU that can fail to cause inlet valve fail code (I donít think these are the same thing but correct me if I am wrong..)

Similar Threads

  1. URGENT Vr6 oil pump & power steering pump
    By Tony_familiaruk in forum Wanted
    Replies: 4
    Last Post: 29th December 2015, 8:09 AM
  2. Replies: 6
    Last Post: 30th May 2015, 6:18 PM
  3. Lift Pump/Fuel Pump Assembly help -
    By Moreado in forum Engine Bay
    Replies: 0
    Last Post: 25th May 2013, 1:44 PM
  4. Replies: 4
    Last Post: 8th May 2013, 8:41 PM
  5. Replies: 19
    Last Post: 5th March 2009, 10:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupť! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.