Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 51

Thread: Any more 3D printing projects?

  1. #21
    CF-oholic! delfinis38's Avatar
    Join Date
    24th February 2006
    Location
    Muckle Flugga & Fastnet Rock
    Posts
    3,368
    Quote Originally Posted by Corroda View Post
    How about the plastic inserts on the wings. The ones that are used to protect the wings from the screws holding the wheel arch liner.
    I think I cleared vw out of these last year.. I have a bag of about 20. They were about at 25p each so I took the whole stock.
    Corrado VR6 - Aqua Blue LC5U - 96 'N' Plate
    Black Leather - Heated Seats - Air Con
    Totally Standard and intend to keep it that way !


    Hibernation for Winter ! SORN

  2. #22
    CF-oholic! delfinis38's Avatar
    Join Date
    24th February 2006
    Location
    Muckle Flugga & Fastnet Rock
    Posts
    3,368
    Quote Originally Posted by Cressa View Post
    How about the rear number plate light. As I've just broken mine trying to clean it I now need a replacement !!
    I've got a brand new one, but never worked out where the wires go so I can change it... I guess I've only looked for a few mins.
    Corrado VR6 - Aqua Blue LC5U - 96 'N' Plate
    Black Leather - Heated Seats - Air Con
    Totally Standard and intend to keep it that way !


    Hibernation for Winter ! SORN

  3. #23
    Enthusiast
    Join Date
    22nd April 2003
    Location
    Trowbridge
    Posts
    545
    A lot of clips & inserts still can be gotten on the internet (Im asking Corrado owners about these white nylon scuttle cover clips,I have the original drawings from the supplier & indeed they are the ones,only issue is I have to buy 12,000 of them which I'm not that bothered,but I just don't want to be left with 11500)
    Whats think?

  4. #24
    ⋆⋆ CF Member ⋆⋆
    Join Date
    2nd July 2018
    Location
    Caithness
    Posts
    11
    Will soon be removing the rear axle for shot blasting, and replacement bushes. There are a few plastic brake pipe clips, and ABS cable carriers on there. Are these still available, or should these be added to the list?

    Sorry for going a bit off topic, but can anyone tell me where to get replacement spring steel brackets to support the rear flexible brake hoses?

  5. #25
    CF-oholic! delfinis38's Avatar
    Join Date
    24th February 2006
    Location
    Muckle Flugga & Fastnet Rock
    Posts
    3,368
    Quote Originally Posted by delfinis38 View Post
    I think I cleared vw out of these last year.. I have a bag of about 20. They were about at 25p each so I took the whole stock.
    quite happy for anyone to scan one of these parts, if they want to 3d print any....
    Corrado VR6 - Aqua Blue LC5U - 96 'N' Plate
    Black Leather - Heated Seats - Air Con
    Totally Standard and intend to keep it that way !


    Hibernation for Winter ! SORN

  6. #26
    ⋆⋆ CF Member ⋆⋆ Jim Bowen's Avatar
    Join Date
    16th May 2005
    Location
    Essex
    Posts
    8,960
    Just thought about the white plastic headlight adjusters, that would be a good part to make
    Just like a golf................But better!!!

  7. #27
    Newbie RadoRon's Avatar
    Join Date
    9th August 2018
    Location
    Duisburg, Germany
    Posts
    7
    I would suggest a simple part for a first project. The clip 535 853 832 A 03C is no longer available. He is to attach the cover of the windshield. The snap-in nose breaks like that. This part should be relatively easy to manufacture. The sleeve 535 853 837 belongs to this clip. It will probably not be available soon either. Without these two parts you can not install a windshield. Parts of the guide of the sunroof are also good, but probably difficult to manufacture.
    Last edited by RadoRon; 13th August 2018 at 8:18 PM.
    Corrado driver since 1991 (uninterrupted) with a brand new G60 US model (currently in full restoration).
    Second G60 since 2013, German model, saved from scrap and returned to traffic.
    Both tornado red and manufactured 1990 - CCG Member

  8. #28
    ⋆⋆ CF Member ⋆⋆ Jim Bowen's Avatar
    Join Date
    16th May 2005
    Location
    Essex
    Posts
    8,960
    You can fit a windscreen without those clips
    Just like a golf................But better!!!

  9. #29
    Newbie RadoRon's Avatar
    Join Date
    9th August 2018
    Location
    Duisburg, Germany
    Posts
    7
    This clips are not to fit the windscreen. This clips are to attach the cover of the windshield (wipers). If this clips breaks, the cover must be glued on to fix it.
    Corrado driver since 1991 (uninterrupted) with a brand new G60 US model (currently in full restoration).
    Second G60 since 2013, German model, saved from scrap and returned to traffic.
    Both tornado red and manufactured 1990 - CCG Member

  10. #30
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,207
    Possibly another small plastic item that could do with being 3D printed,
    is the small screw end caps that fit into the head of some of the cross headed screws, i.e the Phillips screws, that are used on the door cards.

    Part number I think is 321 867 169B
    Or 321 867 169B 01C satin black,
    but I suppose if they're 3D printed any colour is potentially possible as our interiors came in black, grey, and beige.

    Si
    Had MK2 Scirocco Scarla 1998 to 2002


    Now have Corrado 2.0 16v since 2002 still got it

Similar Threads

  1. Non Corrado projects
    By leon263 in forum Members Gallery
    Replies: 0
    Last Post: 20th August 2013, 6:05 PM
  2. Weekend projects
    By goozie in forum General Car Chat
    Replies: 18
    Last Post: 15th March 2013, 6:15 PM
  3. Car sticker printing
    By Nick_Micouris in forum General Car Chat
    Replies: 4
    Last Post: 16th September 2004, 4:19 PM
  4. Show us your mad projects then...
    By biggerbigben in forum Members Gallery
    Replies: 19
    Last Post: 19th November 2003, 12:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.