Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Part number 191 803 483 (fuel filler neck repair panel)

  1. #1
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506

    Part number 191 803 483 (fuel filler neck repair panel)

    I originally posted in the OEM VW PARTS PRICE ENQUIRES thread regarding part number
    191 803 483
    It's listed as fuel neck repair panel for MK3 Golf but looks like it will fit the MK2 Golf and our Corrado's.

    I've been searching for a while to see where I can get one from as mine is rusted through, erm I've tried VW Heritage but they're sold out,
    they are how ever in the process of getting 1000 remade which possibly won't be available until early next year 2019

    I've been lucky to have found a new replacement repair panel, I've since drilled out the spot welds and removed my old part, comparing the new panel with my old one, they are a perfect match so the new batch that VW Heritage will have available hopefully early next year, will be fine for our Corrado's I believe.

    I found the part on Ebay and payed just over £60 for it, but it's since gone up in price to £140 which is just ridiculous.
    Ebay item number 330887096333
    So if you need this item, like I say it hopefully will be available again in 2019

    I'll keep my old fuel neck support panel for now, just so I can check it against one of the new batch from VW Heritage once they have them in stock again.

    Si
    Last edited by vw rule; 4th October 2018 at 11:15 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  2. #2
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    Hi Anna any update regarding the above repair panel.


    Many thanks
    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  3. #3
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    I've chased the above item in question,
    just got off the phone now with the guys at VW Heritage, basically this part is still on back order.
    I've asked them to call me once they have a completion date.

    Si
    Last edited by vw rule; 4th June 2019 at 12:45 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  4. #4
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    I've managed to find the above repair panel on EBay again, the seller is in Germany and has got good feedback.

    Their EBay item number is 273685612358
    The part number is the same: 191 803 483
    Cost is approx £33.00 and postage about £8.50

    States they've only got 5 left in stock.



    Until I hear back from VW Heritage regarding a completion date about this item,
    this EBay alternative could help anyone who needs this ASAP.

    Hope this Helps
    Si
    Last edited by vw rule; 4th June 2019 at 7:25 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  5. #5
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    I've just had a call from VW Heritage,
    it's good news this item above is now back in stock with them.

    Retail price is £26.30 + VAT
    Part number 191 803 483

    This is the repair fuel neck panel,
    can be used on Golf MK2 / MK3 & Corrado.

    Hope this hopes
    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  6. #6
    Enthusiast
    Join Date
    15th October 2008
    Location
    West Yorkshire
    Posts
    291
    Good info, thanks

  7. #7
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    Quote Originally Posted by Simeon View Post
    Good info, thanks
    No worries

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  8. #8
    CF Nutter fendervg's Avatar
    Join Date
    13th June 2009
    Location
    Dublin, IE
    Posts
    2,108
    Where does this part go?
    ____________
    fendervg

    93 Corrado VR6
    Members Gallery

  9. #9
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    Quote Originally Posted by fendervg View Post
    Where does this part go?
    It's normally welded at the top of the O/S/R inner wheel arch, basically the top of the fuel filler neck of fuel tank is bolted to it, to help stabilize / secure it. Quite often this part in question is rusted out as there can be damp dirt / mud stuck up there, that over time eats in to the mental around & behind the fuel filler flap area.

    I've had to cut mine out as it was rusted through.

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  10. #10
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,506
    I can't upload any photos,
    so please see link below.

    https://www.clubgti.com/forums/index....279066/page-7

    That's pretty much how mine looked rusted through like that in those photos from the ClubGTI Forum. Like I say it's caused by all the damp mud that you just can't quite get to.

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

Similar Threads

  1. Replies: 6
    Last Post: 13th December 2017, 6:56 PM
  2. dreaded filler neck rot.
    By Bs6VR6 in forum Exterior
    Replies: 9
    Last Post: 16th November 2014, 10:16 PM
  3. Fuel filler surround (rear quarter panel)
    By corrado wannabe in forum Wanted
    Replies: 14
    Last Post: 12th April 2014, 9:30 PM
  4. Replies: 9
    Last Post: 26th January 2012, 10:40 PM
  5. rusty filler neck help
    By mark__gti in forum Exterior
    Replies: 13
    Last Post: 10th April 2010, 6:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.