Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Switches , Backing plates, springs, Vibra front Mount

  1. #1
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713

    Switches , Backing plates, springs, Vibra front Mount

    Hi I have these used switches for sale as a bundle from a 95 VR6 Corrado.

    They function but do not iluminate so I changed them out for new ones, those who know how to change the bulbs could be a bargain. the seat heating one cost me the best part of £90 new I believe from VW CLassics alone.

    £30 Plus postage for x 3 switches. SOLD

    Light switch
    Demister switch and blank
    Seat heater selection dial

    Still have the H & R springs for sale and Vibra Techinics front engine mount if the lad dont contact me tomorrow to arrange collection. £30 only for springs that could do with been powder coated if you want them to look mint and only £30 for Vibra mount Now Sold collection only on these folks.

    Also backing plates brand new x 2 drivers side front (not passenger side). Set of rear backing plates 1x brand new other has been powder coated and has some erosion. £35.00 for all four + Postage. Sold to Culshaw

    For sale Genuine Used VW Connecting Hose NOS VW Corrado 021133518H with some age related marks , this is the one that connects to the top of the pcv , these cost a woping £90+ postage new and can only get from Germany . £25.00 Plus postage

    Engine right side HD lead holder trim, age related marks. £15.00 Plus postage.

    Engine

    Cheers.

    switch2.jpeg

    switch3.jpeg

    backing plates.jpg
    Vibra1.JPG

    Vibra.jpeg

    springs.jpeg

    Engine trim.jpeg

    hose.jpeg

    Hose1.jpeg
    Last edited by Keyo; 3rd April 2019 at 8:42 PM.

  2. #2
    ⋆⋆ CF Donator ⋆⋆ voo51's Avatar
    Join Date
    14th October 2007
    Location
    midlands
    Posts
    631
    Hi. Can I have the switches please posted?

    Thanks

  3. #3
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    Hi Voo,

    No prolem PM sent .

  4. #4
    ⋆⋆ CF Member ⋆⋆
    Join Date
    19th March 2009
    Posts
    847
    I'll take the backing plates please

    16v Moonlight Blue
    1994 VR6 Green Pearl

  5. #5
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    Quote Originally Posted by culshaw View Post
    I'll take the backing plates please
    Hi Culshaw,

    PM sent.

  6. #6
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    Please note the parts will be going out Tuesday so get your orders in by then as I will be only going to the post office once a week therefore after .

    Cheers

  7. #7
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    Also for sale as a pair, Genuine VW Bosch Mass Air sensor and original VW cam sensor taken off a 1995 VR6 Corrado, please check part numbers fit your age of veicle as there are variations. I have taken these off my car and replaced with new sensors, Im a doing a full renovation of the car and using as a daily so have been a bit ocd with part replacement these were working fine with no fault codes showing on VAG


    sensor.jpeg
    sensor1.jpeg
    sensor2.JPG

    Bosch VW Mass air sensor part number 021 906 462 there is a litlle bit of heat melt to sensor around the plastic trim near the sensor plug as seen on the picture .

    Cam sensor.jpeg
    cam sensor1.jpeg

    Cam sensor Part number 021 907 601A

    These two genuine VW parts retail in the regions of £200 and something new I believe correct me if I'm wrong.

    £45.00 for the pair + postage

    Cheers.
    Last edited by Keyo; 29th March 2019 at 1:19 PM.

  8. #8
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    Voo please confirm if you want the switches as Im sure others would be interested.

    Vibra mount collected - sold
    Backing plates posted - sold

    Cheers.

  9. #9
    ⋆⋆ CF Donator ⋆⋆ voo51's Avatar
    Join Date
    14th October 2007
    Location
    midlands
    Posts
    631
    Hey so sorry, I've a terrible memory. Send me your PayPal and I'll pay today. Sorry again
    Turns out you can polish a turd!!

    1995 Corrado VR6 twilight violet -died and gone to Corrado heaven
    1994 Corrado 16v blackberry -was the car love of my life - split to help other C's around the world.
    http://s32.photobucket.com/albums/d14/voo51/Corrado/
    1995 Corrado 8v black - complete gonner - broke for parts
    1994 Corrado VR6 ice violet -she's here!........... It all starts again!
    http://s32.photobucket.com/albums/d1...vr6%20Corrado/

  10. #10
    ⋆⋆ CF Donator ⋆⋆ Keyo's Avatar
    Join Date
    16th December 2018
    Location
    West Midlands
    Posts
    713
    No worries Voo pm sent.

Similar Threads

  1. What do these switches do
    By petercabrio in forum Newbies Hangout
    Replies: 6
    Last Post: 30th October 2015, 1:01 PM
  2. Switches
    By seanrodford in forum Parts for Sale
    Replies: 0
    Last Post: 16th March 2014, 10:18 PM
  3. Assorted Late Corrado Interior Switches for sale
    By dan95x in forum Parts for Sale
    Replies: 6
    Last Post: 9th January 2014, 5:27 PM
  4. Too many switches
    By 12 DEG BEN in forum Interior
    Replies: 8
    Last Post: 10th September 2007, 5:14 PM
  5. Switches on 16V
    By Baz2004 in forum Engine Bay
    Replies: 7
    Last Post: 18th April 2005, 3:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.