Results 1 to 10 of 10

Thread: Under body white plastic fuel pipe retaining clip 1H0 201 449

  1. #1
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259

    Under body white plastic fuel pipe retaining clip 1H0 201 449

    I'm after the above item it should hold x4
    8mm=(1/4") fuel pipes.

    VW Heritage sell some but they are for the MK2 Golf, as their clip is a different part number
    191 201 449 plus the outer two clips are for fuel pipes but the two centre clips are smaller possibly for 3/16 brake pipes.
    On their site it states for Corrado also,
    but their clip is no good for my Corrado due to mine having at least 3 fuel lines, especially above my fuel tank.

    I've looked on the VW Classic Parts site but can only find part number 191 201 449
    And the same when looking on VW Heritage.
    Can't see any fuel clip with part number
    1H0 201 449

    But have been doing some digging around online, and looks like the clip I need is also used for Audi A3, VW Beatle, VW Passat, and some Skodas by the looks of it.
    Looks like it was used from mid 1990s up until 2010 but possibly still in use ??

    So hopefully Audi main dealer will have stock, or possibly VW, I'll phone them next week.

    Have any of you guys got any spare fuel retaining clips 1H0 201 449 just in case they're obsolete with the main dealers.


    Other then that I'll get some 3D printed.


    Many thanks
    Si
    Last edited by vw rule; 2 Weeks Ago at 7:00 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

  2. #2
    ⋆⋆ CF Donator ⋆⋆ lilfuzzer's Avatar
    Join Date
    25th August 2004
    Location
    County Durham
    Posts
    5,963
    Hi Si

    probably will have a spare you can get copied if you want for 3d printing
    Chris
    93 Bordeaux Pearl VR6 'Verity'
    94 Blackberry VR6 - not anymore
    Project number 28
    number 29,30 &31

    previous rados
    91 Bordeaux pearl 1.8 16v
    94 Sherry Pearl VR6
    93 Bordeaux pearl VR6
    93 Aqua Blue VR6
    94 Moonlight Blue VR6
    95 Silver 16v 2.0
    95 White 8v
    93 Flash Red
    94 Classic Green VR6
    unknown blackberry VR6
    94 green 8v
    90 green 16v
    94 Black 2.0 16v
    91 Blue 16v
    91 Black G60
    94 Grey 16v
    92 green 16v
    94 Ice Violet VR6
    94 green 8v
    too many

  3. #3
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    Hello mate,

    cheers for the offer I was tinkering around yesterday and most of the clips just disintegrated into small pieces, mainly the ones above the fuel tank and fuel filter areas,
    so ended giving up on that job and doing something else on my Corrado

    Anyway today I thought I'd have another go at removing the last few remaining fuel pipe retaining clips, and luckily removed 1 that is still fairly well intact, so for the moment I think I'll be ok.

    Thanks again for the offer,
    I'll give you a shout if this one I have falls to bits.

    I'm going to phone the Audi, Skoda and VW main dealers next week, and will report back if any have stock left.

    But if no joy then yes I'll get a load 3D printed, as I'm also looking into getting the small wiper linkage done for our RHD Corrado's.


    Thanks again
    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

  4. #4
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    Right I've just been on the phone to my local VW Main Dealer, looks like the clip in question is still in use, I've ordered just the one to see if it's correct or not, as the parts guy couldn't confirm if it 100% looks like
    1H0 201 449 or 191 201 449 so I'll check the part when I collect it on Saturday.
    Cost is roughly £4.35 per each = 1H0 201 449

    Hopefully it'll be bang on,
    I'll confirm at the weekend,
    as I'm working all week.


    Si

  5. #5
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    I've just collected the fuel pipe retaining clip from the Dealer, I can confirm that it is the correct item and they are still available.

    Part number 1H0 201 449
    £3.42 per each


    The one VW Heritage do is mainly for the MK2 Golf and is part number
    191 201 449

    Si
    Last edited by vw rule; 1 Week Ago at 3:20 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

  6. #6
    Regular
    Join Date
    3rd July 2017
    Location
    Warwickshire
    Posts
    183
    I noticed I have a 2 or 3 broken. Do you think they are the same for the G60?

  7. #7
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    Possibly yes as they are used on the 1.8 16v which ran along side the G60 from 1989 to 1992,
    plus they both have a under body fuel swirl pot like the 2.0 16v that I have.


    The MK2 Golf type fuel clip is different,
    as the 2 centre clips are for 3/16 brake pipes,
    and the 2 outer clips are for 8mm (1/4") fuel pipe, this is a one piece clip but holds two different sized pipes = 191 201 449

    The clip I needed is the one piece clip that can hold four 8mm (1/4") fuel pipes.
    = 1H0 201 449
    This one is still available like I say at the main dealers and is used on Audi's, VWs and Skoda 1988 to present.

    I've actually ordered some more as mine are all broken pretty much.

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

  8. #8
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    I'll update the OEM VW PARTS PRICE ENQUIRIES thread with the above item
    1H0 201 449

    Link below: (added on page 26)
    http://the-corrado.net/showthread.ph...quiries/page26


    Si
    Last edited by vw rule; 1 Week Ago at 9:41 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

  9. #9
    Regular
    Join Date
    3rd July 2017
    Location
    Warwickshire
    Posts
    183
    Ok thanks for the reply.

    I will grab a few myself no doubt.

  10. #10
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,259
    Quote Originally Posted by mooG60 View Post
    Ok thanks for the reply.

    I will grab a few myself no doubt.
    No worries.
    On my Corrado there's at least 8 of the plastic clips in question, so possibly similar amount on other Corrado models.

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.


    Now have 94 M reg Corrado 2.0 16v since 2002 still got it,
    been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver.

Similar Threads

  1. VR6 Fuel Pipe Plastic Clamp - SOLD
    By daves16v in forum Parts for Sale
    Replies: 0
    Last Post: 11th October 2015, 8:06 PM
  2. Replies: 4
    Last Post: 30th May 2014, 1:43 PM
  3. vr6 anti roll bar retaining clip
    By andyhudson in forum Drivetrain
    Replies: 1
    Last Post: 8th April 2013, 7:55 PM
  4. White plastic door pin clip
    By krishen in forum Suppliers Forum
    Replies: 3
    Last Post: 13th February 2012, 2:27 PM
  5. Plastic pipe connecting to throttle body obd2
    By Rams in forum Engine Bay
    Replies: 1
    Last Post: 9th March 2011, 2:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.