Results 1 to 6 of 6

Thread: Another ABS pump - 357614111 for a 94 VR6

  1. #1
    ⋆⋆ CF Donator ⋆⋆
    Join Date
    12th October 2004
    Location
    Oxford
    Posts
    153

    Another ABS pump - 357614111 for a 94 VR6

    Also in need of one...
    Seen the thread below.
    Let me know if you have anything suitable.
    Fault code indicated issue with inlet valve.
    Thanks.
    Last edited by wapadrand; 1 Week Ago at 9:44 AM. Reason: Add information on fully codes

  2. #2
    ⋆⋆ CF Donator ⋆⋆
    Join Date
    12th October 2004
    Location
    Oxford
    Posts
    153
    Does anyone know if the pumps 35761411 and 358614217 are interchangeable?

  3. #3
    CF Nutter fendervg's Avatar
    Join Date
    13th June 2009
    Location
    Dublin, IE
    Posts
    2,041
    35761411 looks to be different and has the ABS pump unit integrated with the master cylinder and reservoir. RHD drive VR's have a 6 outlet pump unit located behind the coolant bottle, and a specific master cylinder with two outlets.
    ____________
    fendervg

    93 Corrado VR6
    Members Gallery

  4. #4
    ⋆⋆ CF Member ⋆⋆
    Join Date
    24th December 2008
    Location
    Crewe Cheshire
    Posts
    3,918
    Have you scanned yours? The whole system is fragile, not just the pump.

    ECU suffers water ingress. Faults - various

    Pump suffers dry joints on the board as well as mechanical failure. Faults - inlet / outlet valve fauts

    Wheel sensor - water ingress. Faults light permanently on - physically damaged / water ingress

    Sensor reluctor rings. Faults damage and rust issues causing the pedal to pulse at low speeds.

    Pedal position sensors. Faults dry / cracked solder joints - usually puts the light on when using the brakes, but can also be random.

    There's also relays and fuses behind the glovebox. Faults power supply issues.


    My car had one wheel sensor (light permanently on) - the fault then went intermittent, light on every time from a cold start, but would be OKish from a hot start - then fault, ( intermittent inlet / outlet valve faults) changed the pump for used. Then went very intermittent, once per 30 min journey to work, changed the pedal sensor and all's been good since.

  5. #5
    CF Nutter fendervg's Avatar
    Join Date
    13th June 2009
    Location
    Dublin, IE
    Posts
    2,041
    Good points Dox - the codes can be pretty basic and are not always definitive, especially the valve related ones, which are rarely the valve but more likely to be with the PCB or wiring loom.

    I'd check sensors, rings, pedal position sensor, loom, ECU and pump unit - in that order.

    I'm not really sure what BBA-Reman can actually do to repair them, apart from testing and cleaning. When I was dealing with them, they first sourced a unit that turned out to be unrepairable, and I then bought another and sent it to them for testing and it checked out ok. In other cases I've heard they can clean out the valves to free them up, and sometimes carry out some solder repairs on the PCB, although in at least one case they simply swapped it out with one from another unit.
    ____________
    fendervg

    93 Corrado VR6
    Members Gallery

  6. #6
    ⋆⋆ CF Donator ⋆⋆
    Join Date
    12th October 2004
    Location
    Oxford
    Posts
    153
    Thanks guys.
    I'm dependent on my mechanic!
    He tells me I need a new pump. I assume he has been through the other possible problems. I will relay all this to him....

Similar Threads

  1. Replies: 0
    Last Post: 2nd July 2019, 7:45 AM
  2. Replies: 6
    Last Post: 30th May 2015, 6:18 PM
  3. Lift Pump/Fuel Pump Assembly help -
    By Moreado in forum Engine Bay
    Replies: 0
    Last Post: 25th May 2013, 1:44 PM
  4. Replies: 4
    Last Post: 8th May 2013, 8:41 PM
  5. Replies: 19
    Last Post: 5th March 2009, 10:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.