Results 1 to 6 of 6

Thread: G60 Front Mount Bracket

  1. #1
    Enthusiast Stone0311's Avatar
    Join Date
    6th September 2004
    Location
    Liskeard, Cornwall
    Posts
    279

    G60 Front Mount Bracket

    Hi, has anyone got any photos of the front engine mount bracket arrangement on a G60? Also is there more than type?
    The bracket that came on the engine is 1H0-199-273-D which doesn't match Etka (357199273)
    Thx
    Last edited by Stone0311; 2 Weeks Ago at 9:30 AM.

  2. #2
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,511
    Hello mate,

    I think you might have the wrong engine mount bracket on there,
    as part number 1H0 199 273D comes up as VR6 on ETKA.

    VR6 Corrado engine mount bracket according to ETKA

    Part number 1H0 199 273D with manual gearbox
    https://www.ecstuning.com/b-genuine-...le/1h0199273d/

    Part number 1H0 199 273C with automatic gearbox (difference of at least 1/2" between this 273C and 273D)




    For all 4 cylinder Corrado's the engine mount bracket should be as follows:

    Part number 357 199 273 with manual gearbox
    https://www.ebay.co.uk/itm/VW-Passat...YAAOSwJihcq5Dg

    Part number 357 199 273A with automatic gearbox



    Hope this helps

    Si
    Last edited by vw rule; 2 Weeks Ago at 1:30 PM.
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  3. #3
    Enthusiast Stone0311's Avatar
    Join Date
    6th September 2004
    Location
    Liskeard, Cornwall
    Posts
    279
    Thanks Si, looking at the bolts etc from when i took it off the previous owner must have bodged it at some point.
    Looks like the parts quest continues then...cheers for the ebay link
    1989 16v to G60 In-progress

  4. #4
    ⋆⋆ CF Member ⋆⋆ vw rule's Avatar
    Join Date
    9th February 2013
    Location
    Bournemouth
    Posts
    1,511
    No worries.

    I'd speak to VW Heritage as they might have stock of the mount bracket you're after, looks like the MK2 Golf uses the same bracket but part number is slightly different.

    Part number 191 199 273
    cost new £15 to £18 in stock
    Fits the (KR) 1.8 16v Golf but should also fit the (PG) G60

    The secondhand ones for the Corrado go for stupidly expensive prices on Ebay.

    Si
    Had MK2 1.8 Scirocco Scarla 1998 to 2002
    had it lowered on original wheels,
    K&N air fitler and Janspeed exhaust system.

    Now have 94 M reg Corrado 2.0 16v since 2002 still got it, been off the road now since early 2015
    hoping to get it finished this year.

    Also have a 2015 Seat Ibiza TSI i-tech as my daily driver. Plus I'm on The SEAT Forum.

    Link to 16v torque settings & ECU pin locations.
    http://the-corrado.net/showthread.ph...fuel-pressures

  5. #5
    Just out of interest I recently purchased the mount your after instead of the VR6 Mount which I need, would you consider a swap?

  6. #6
    Enthusiast
    Join Date
    15th October 2008
    Location
    West Yorkshire
    Posts
    296
    Quote Originally Posted by vw rule View Post
    No worries.

    I'd speak to VW Heritage as they might have stock of the mount bracket you're after, looks like the MK2 Golf uses the same bracket but part number is slightly different.

    Part number 191 199 273
    cost new £15 to £18 in stock
    Fits the (KR) 1.8 16v Golf but should also fit the (PG) G60

    The secondhand ones for the Corrado go for stupidly expensive prices on Ebay.

    Si
    None of the Mk2 brackets will fit as these are for 020 gearboxes and the Corrados all have 02A 'boxes

Similar Threads

  1. VR6 Front Engine mount bracket
    By GBH93VR6 in forum Wanted
    Replies: 5
    Last Post: 28th September 2018, 11:49 AM
  2. Vr6 front engine mount bracket
    By billinjah in forum Wanted
    Replies: 1
    Last Post: 3rd September 2014, 7:52 PM
  3. G60 Front Engine Mount Bracket
    By P3rks in forum Wanted
    Replies: 0
    Last Post: 18th June 2013, 10:45 AM
  4. G60 front engine mount bracket
    By DaveyMk2 in forum Wanted
    Replies: 1
    Last Post: 18th January 2012, 8:10 AM
  5. Vr6 Front engine mount bracket
    By muppetlab in forum Engine Bay
    Replies: 0
    Last Post: 29th October 2009, 2:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
We are the world's largest community for VW's Super Coupé! Be it 8v, 16v, G60 or VR6 (or maybe something else!), everybody's welcome! If this is your first visit, be sure to click register and fill out your details before you can post.
Help us
This site is run on donations.
Please help keep the forum alive!
Follow us
advertising & sponsorship
Are you a company looking for advertising that could benefits our users? For site & forum sponsorship, please see our dedicated microsite here.