Erny

Annie i asked the previous owner, its a fast road mk2 vr6 conversion mount bought from venom, But it looks identical to my friends 16v mount size wise and bolt pattern, i guess the difference is in the rubber bush

Ill lool what numbers are on it in a bit to try and find exactly what model it is. No idea why i put solid in the title as this isnt solid, sorry bout that

Previously on a mk2 vr6, so compatable with all mk2s and corrado 16and 8vs or converted to vr6 but still using 16/8v front crossmember. Rubbers in excellant condition, done a few thousan miles before the car took a bump to the rear, bo use to me as i already have one. £60.00 Located in south yorkshire or can do bank transfer and post

Your going to have to settle for 2nd dibs on them at the moment, ive had a lad ive previously dealt with call me moments after posting, Theyve been shrink wrapped since i got them so Ill unwrap them and take some photos tomorrow, if you want to pm me your email ill send you photos. Thanks

They are late spec wings in Aqua Blue, the arches have been ever so slightly rolled but it doesn't affect the way they look or the fitting of the arch liners. There is no rust on the pannels at all, but there maty be some ever so slight on the bolt holes on the underside (and I mean slight surface stuff; no greater than a Bic pen end size which will sand off) . The N/S wing has a 20p size dent on the arch which would come out with PDR. The O/S wing has a scuff on the lacqure which I will happily machine polish out for you if you don't plan on repraying these. £60.00 collection from rotherham.

Makes a big difference to lightening the interior, never had any problems with noise. And i used standard corrado runners and motor. And they dont scratch up like painted panels. Got a spare glass panel if anyones keen pm me.

lowest ill go is £170 Box stands me at 180, after sourcing the output flanges and getting new oil, im simply trying to claw abit if cash back to pay for this 20v in the back of my mates van as i type this. I know the lad were the box was from so know its a good runner

02j v5 gearbox, covered 62k already has bolt in 100mm output flanges ready for a straight swap for a vr6 box, comes with two bottles of genuine vw gearbox oil, and a choice of 02j or 02a shift towers ideal bolt on short ratio 3.94 gearbox £180.00 i intended to use this box instead of my 3.6fd box, but want to fund a 20v into my mk2. got other vr6 parts listed, 268 cams 6branch, stainless crack pipe etc collection from rotherham south yorkshire

Schrick 268 high lift cams for a vr6 Theyve covered around 10k, no signs of wear. Excellant addition Cqn provide pics but cams all look the same. £300.00 I drove for a while on the standard map which seemed fine, but had the ecu re-mapped (and de-imobilised) by stealth, can provide ecu for an additional £100.00 Location is rotherham south yorkshire, can post. Contact via this thread, pm, email [email protected] or phone or text 07835027455

Got a 16v manifold from a early mk2 kr, will fit krs and 9as and help breath topend. Both upper and lower parts Has throttle bodie and braided injector lines and metering head all still attached to it. Upper part has been polished but needs a little more to get it to shine nice. Yours for 50 ono Location rotherham south yorkshire.

Front g60 arb Needs cleaning up and paint if you care. 40pounds collected from Rotherham Post at your cost, no idea what that would be due to awkward size and shape. Bank transfer or cash on collection. Thanks Liam.

Why worry about shape etc and try and graft the ends on, if you want them to sit the same as us spec just cut an inch or so around the us ones and simply graft them in that way you getthe correct recess and don't have to worry about the ends cracking on your bumper.

Newman 268 high lift cam shaft with turbosport blue vernier pulley, will fit mk2/3 corrado and g60 8vs. Cam shows no signs of wear and has been on our lasses brothers 2.0l 8v mk2 fir the last year, getting weekend and evening use. £130.00 delivered or Collection from Rotherham or Barnsley, I don't have paypal so bank transfer or cash on collection, our lass may let me use her paypal. Contact via pm, email - [email protected] , or call or text 07835027455

As far as I'm aware there all good. We can take them off the other if not

Two tailgates both have spoilers and working Spoiler motors One was White has alittle rust hole in the usual place, is currently satin black on the outside also has glass and seal. Ideal for a re-paint. Spoiler has 3m carbon wrap on. £20.00 gotta be worth it in parts easy. The other is dragon green and has the rear screen removed, I intended to fit a polycarbonate window When resprayed. £20.00. Can provide cnc'ed polycarbonate window with this at an extra cost.(£60.00 all in) Collection preferred from Rotherham south Yorkshire. Contact via this thread, pm, email : [email protected] or call or text 07835027455

From what I remember the paint is good, was from the g60 in conisborough you had parts from before. I'll take you a picture later. You still work at parkgate? I'll be at the garage around 1 if you would like to nip over on your dinner break. Mile oak road broom valley. You got my number still?

Rear bumper skin only, dragon green, tow eye has been deleted and smoothed and painted. Was previously on a dragon green g60. I purchased this along with most other body panels in preperation for a re-paint of my own car, slight change of directions means this is now taking up much needed space. 20pounds Ono Collection from Rotherham south yorkshire Can send pics via email if necessary Contact via this thread, pm, email- [email protected] or call/text 07835027455. More parts to be added when I have time to sort thru, feel free to ask.

Got one, usual rust but solid. Rotherham south Yorkshire pal. 20quid anygood? Pm or text me an email an I'll send a pic. 07835027455

I have a set of rear quarter glass I removed awhile ago I'll have a good look at them when I go to the garage tomorrow also have a set if rubbers removed from another car. I'll asses condition and try an get some pics, rear screen glass is quite hard to remove, but you can take a tailgate I have with a screen in it's had tint film on the inside. I'll not want much for that lot, Im in need of space in my garage. Located in Rotherham south Yorkshire. Pm or text me your email and I can send some pics, 07835027455

I looke for quite a while for a manual set up, also tried to make my own winding set up but it's hard work to shift. Good alternative to a sheet steel stuck or riveted on your roof is to bond the sunroof panel (minus the inner skin) in place with tiger seal or something like, I did this before I decided to weld my sunroof up. Which went surprisingly well and doesn't look like a crinkle cut crisp,

Might be a daft question but, I need to swap my gearbox this weekend, I never struggled swapping 4cylinder boxes on my own while leaving the engine in place but the vr seems like it might be a task. Am I best just pulling the whole engine out for an easy life or is it not too hard?

Just add a little update incase this pops up in a search, mods delete the whole threa if you prefer. Fitted today, was easy, little messing about trying not to cut too much of the inner skin. Drilled new holes for the pins in the slam panel as I didnt want the latches too close to the curve at the front of the bonnet. Any one else wants to add there experience for others future reference. Thanks

Quick question for those that have fitted these, did you use an existing hole in the slam panel?

Defo Go over board making sure sand doesn't get in there, a lad round ere gave me an inlet manifold he had just had coated but there was sand stuck everywere inside where the company that did the work hadn't masked it up.

Got a few pics matey, I've looked at the advanced post you mentioned won't let me do it from my phone I'll try later if I get chance at the computer. In the mean time if you want to send me you email address I'll send them over.