flusted 0 Posted June 16, 2005 Ive just had a mate fab me up this airbox outta ally,which will allow me to run a cone filter under the wheel arch. Its basically a prototype at the mo but he is prepared to make more if people are interested? Not sure how to go about stoppin filter sucking up water from the road yet,but il proberly make a shield of some sort. Heres the pic Quote Share this post Link to post Share on other sites
Bally 0 Posted June 16, 2005 hhhmm..... get some pics of it in yr engine bay... Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted June 16, 2005 Yeah, some pics would be good. You may have a decent market if it works. Quote Share this post Link to post Share on other sites
billinjah 0 Posted June 16, 2005 cor bally get that mate thats, nice nicer than the pipercross one i reckon! Quote Share this post Link to post Share on other sites
Bally 0 Posted June 17, 2005 LOL Bill we'll see... Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 17, 2005 Looks like good quality fabbing. Quote Share this post Link to post Share on other sites
flusted 0 Posted June 17, 2005 Still workin on it.Guna get some hooks welded to it so the original rubber bands can still hold it in place,and need to make a right angle on the tube comin out of box as the samco doesnt fit through the hole. Quote Share this post Link to post Share on other sites
olly elworthy 0 Posted June 20, 2005 may be better taking the inlet out of the front right hand corner so you can run a large pipe, 80mm or so, down the original carbon canister hole,(not sure if the 16v`s had a canister but if not there will be a plate where the hole is that`ll just tap out with a mallet done this on my golf`s),,, strove motorsport did an induction kit a little similar to this it may be worth you having a search on there for more ideas, looks like a quality piece of work so far :wink: Quote Share this post Link to post Share on other sites
mistrall 0 Posted June 20, 2005 looks intreaging :) - pics preettyy pweezzz Quote Share this post Link to post Share on other sites
flusted 0 Posted June 20, 2005 may be better taking the inlet out of the front right hand corner so you can run a large pipe, 80mm or so, down the original carbon canister hole,(not sure if the 16v`s had a canister but if not there will be a plate where the hole is that`ll just tap out with a mallet done this on my golf`s),,, strove motorsport did an induction kit a little similar to this it may be worth you having a search on there for more ideas, looks like a quality piece of work so far :wink: It does run down through the carbon canister hole! Stroeves 1 sits in the engine bay lapping up hot air! Quote Share this post Link to post Share on other sites
