G60Dan 0 Posted June 30, 2005 Back in late October/early November I bought a Miltek system & de-cat pipe from JMR. As in the picture, the pipe, NOT the box, the pipe! has split. I just wondered where I stood on getting a replacement?? Am I looking to have to buy a replacement? Or will Miltek send a replacement? Cheers Dan Share this post Link to post Share on other sites
Neil VR6 0 Posted June 30, 2005 Contact John (16VG60) then! Having had lots of work done by him I would imagine you'd get a replacement from Milltek straight away under warranty. They've got very good customer service. Having said that it may depend on who fitted it? Share this post Link to post Share on other sites
G60Dan 0 Posted June 30, 2005 just spoke to him, alls looking good Share this post Link to post Share on other sites
Henny 0 Posted June 30, 2005 that's a manufacturing flaw... Where the sheild has been welded on it's weakened the stainless pipe which has allowed it to crack. You should have no problem getting a replacement from Milltek as it's obvious what the problem is. Have a word with John and I'm sure he'll sort you out. 8) Share this post Link to post Share on other sites
G60Dan 0 Posted June 30, 2005 John's been really cool about it. I'm going down later today to pick up a replacement. Cheers Lads Share this post Link to post Share on other sites
Henny 0 Posted June 30, 2005 doesn't suprise me he's been OK about it... 8) Share this post Link to post Share on other sites
G60Dan 0 Posted July 1, 2005 John was very helpful, even supplied me with some new bolts for nothing, new de-cat pipe is now on and car is running much better. Thanks again John! Dan Share this post Link to post Share on other sites
Kevin Bacon 5 Posted July 1, 2005 Glad it's sorted, locking. I bet a certain 3 people were expecting me to wade in with some Milltek abuse, eh? LOL! :lol: Share this post Link to post Share on other sites
