wires wires everywhere and other questions

[cheesey 0]

hello new to the forum this is my first real post

just got my raddo g60

doing the things that need to be done like finding where all the spare wires go a getting rid

but under the bonnet is a thin brown and thin black wire with a proper push on black connector on it just hanging down by the gearbox it comes out from the loom next to the water hose that go's into the end of the block on the gear box side!!!!!.bit dark for pics at the mo

and a blue and white wire taped off next to the oil filter housing.

the sensor on the oil feed pipe to the charger whats that for

oh yeah what fitting are the side light bulbs ,wanna get some LEDs dont know what 1's to get

Any ideas chaps would be a great help

[Super-G 0]

Sidelights will be standard push in type 501 W5W.

[flusted 0]

blue n white isnt used

[cheesey 0]

thanks for that

 

 

anybody any ideas about the thin black and thin brown wire

[Dec 1]

Can you get a photo of it?

 

Sounds like it could be for one of the temp senders at the side of the head. I'll take a proper look at mine tomorrow though, and find out for sure.

[cheesey 0]

cheers dec

this is the conector in question go's into the loom under water pipe into block gearbox end

the onlt feacher is the wires are very thin

 

just thought of another question

why is there a hole in the front of rocker cover towards the cambelt end

cheers

cliff

[mattkh 0]

Hi

Does the reverse light come on when you put it into reverse gear ????

[junkie 0]

If you mean the hole basically under the oil filler cap, its to drain off any oil from filling the oil through the filler hole, like when you miss on 1st pour and it goes all over the sides of the filler.