oil press sender adapter...

[krnau 0]

Could anyone with oe oil press / volt gauges tell me the part number for the T-Piece located in engine bay, where oil press sender is plugged in? I need this adapter, thanks.

 

 

p.d. I used search

[carpy25 0]

corrados use a sender with an oil light switch built in so you remove the oil pressure switch and screw in the combined one

so no "T" piece

 

try demon tweeks on line they sell most sizes of t piece you need m10 fine taper i think but don't know what thread you sender is

 

Rob

[krnau 0]

corrados use a sender with an oil light switch built in so you remove the oil pressure switch and screw in the combined one

so no "T" piece

 

try demon tweeks on line they sell most sizes of t piece you need m10 fine taper i think but don't know what thread you sender is

 

Rob

 

 

so it is a combined sender?..mmm....... thanks. do you know what site has it online?

[krnau 0]

hi?

[mic_VR 3]

on my VR it is a combined sender. I'll have hunt around and see if I can find you a part number mate.

[mic_VR 3]

Think this is what you're after mate, its dual pole VDO Oil Pressure Sender (silver thing in the pic)

 

 

If running on guages like mine, it needs to be a 10 bar (150psi) sender. The only thing I don't know is the thread size that's needed. For some reason I've got in my head that it's an M10 type, but I wouldn't like to guarantee that.

 

Can anyone else confirm??

[krnau 0]

I have a sender like this. but what I mean is I do not want to "lose" the high pressure sensor signal..