vagingit.co.uk 0 Posted January 5, 2010 How on earth can you remove the parcel shelf straps from the shelf? I thought they may just pull through, but no, is it possible to remove them without breaing them? Quote Share this post Link to post Share on other sites
Guest Posted January 5, 2010 They do just pull out but with lots of swearing and praying they dont snap. I would make sure they are nice and warm and use some lubricant!!! :shock: oh yeah, and try getting then out from the other end i.e. pull through till the 'eye' end is the one to feed out and not the fat blob end! Quote Share this post Link to post Share on other sites
Alex_G60_Fanatic 0 Posted January 5, 2010 so what you saying is that you need to pull the wee eye through the hole once its well lubricated ensuring not to tug on the fat blob.... :norty: Quote Share this post Link to post Share on other sites
Guest Posted January 5, 2010 Sounds right to me. Unless someone tells me I did it wrong when I last tried it :norty: Oh and don't forget the heat. It's all going to go horribly wrong if you try too hard in this cold without warming them up nicely first. Quote Share this post Link to post Share on other sites
colinstubbs 0 Posted January 5, 2010 :lol: :lol: :lol: :lol: Quote Share this post Link to post Share on other sites
casual 0 Posted January 5, 2010 i used 2 pairs of hands some lube :norty: and a small screwdriver. found it hard to get started. if the shelf in its flat position they pull through down. get a pair of pliers to squeeze the eyelet if its a bugger Quote Share this post Link to post Share on other sites
shawshankkid 1 Posted January 5, 2010 Drop eyelet in very hot water for 30 seconds and then pull through. easy peasy japaneasy :) Quote Share this post Link to post Share on other sites
Guest Posted January 5, 2010 Drop eyelet in very hot water for 30 seconds and then pull through. easy peasy japaneasy :) That sounds as if you have done it many more times than me :) Quote Share this post Link to post Share on other sites
shaung60 0 Posted January 6, 2010 As already said, from the top down. I use a thin flat bladed screwdriver to push the top of the blob through the hole in the parcel shelf, starting at the edge of the blob and working around. The end with the eyelet in will pull through easy when soft. Quote Share this post Link to post Share on other sites