casual 0 Posted May 13, 2010 Hi all. My Vr6 is currently off the road and has been for a little while now. But i have the MOT on friday. I got hold of a set of original speedlines 15" jobbies and refurbed them. There now fiited but im not sure if the bolts are now correct due to the whitness marks. it seems the angle at which they seat is to sharp. Does anyone have part numbers, sizes or know of where to get an original set from. Any help much appreciated. cheers Quote Share this post Link to post Share on other sites
Supercharged 2 Posted May 13, 2010 VW use a Radius set - just get new ones from VW - £2 ish each. Quote Share this post Link to post Share on other sites
casual 0 Posted May 13, 2010 cheers for the reply Quote Share this post Link to post Share on other sites
Samaj 0 Posted May 16, 2010 Excuse me for jumping in. But what is the stock 'ball seat bolt' spec. As inpitch & head dimension. I need to order some black aftermarket ones & needs specs to order. Cheers Quote Share this post Link to post Share on other sites
buttles 0 Posted May 19, 2010 Casual, I have 15 of the original VR wheel bolts and a full set of the plastic black caps you can have for postage. Bolts not pristine but covered anyway. Neil Quote Share this post Link to post Share on other sites
