Early to Late Fog / Indicator Conversion
From THE Corrado Forum Knowledge Base
Parts required:
- Late indicator / fog units and plactic surround
- 8x N 905 507 01 (speednut)
- 8x N 013 964 9 (screws - self tapping No.5x16mm pan-headed)
Tools needed
- Screwdrivers
- Stanley knife
- Pliers
Procedure
- Remove early lights – screwdriver between fog and indicator to release indicator then unplug bulb holder, unscrew fog lights and unplug loom behind headlamps and pull thru.
- Remove grommet/insert where side of foglight locates
- Remove thin plastic to make room for new foglight – (see pictues) carefully cut the top and bottom with knife against recess then it should brake away easily at sides…
- Replace speednuts and add 2 new ones for the plastic surround to screw into (see pic)
- Offer up new fog light in plastic surround, locate where grommet used to be feeding wiring thru and checking holes line up – adjust if necessary
- Screw in, 4 per side and connect bulb holder into new indicator unit and clip unit into place.
- Lastly check operation of lights.
