Technical Specs - 2.0 8v
From THE Corrado Forum Knowledge Base
Corrado 2.0 8v In production from April 1994 to June 1995
Contents |
Engine
Four cylinder in line, toothed belt driven SOHC (Single Over Head Cam)
Alloy cylinder head, cast iron block transversely mounted in front.
Bosch K-Jetronic fuel injection.
Capacity 1,984cc
Bore
Ouput 115bhp at 5400rpm
Compression Ratio
Maximum Torque 109lb/ft at 4800rpm
Transmission
Front Wheel Drive
5-Speed 3.78, 2.21, 1.43, 1.03, 0.84:1
Reverse 3.80:1
Final Drive 3.68:1
Suspension
Front Independent with MacPherson Struts, lower wishbones, coil sprints and anti-roll bar.
Rear Semi-independent with trailing arms and track correcting bearings, torsion beam, coil springs, and anti-roll bar.
Steering
Rack and pinion PAS (Power Assisted Steering) Standard
3:17 turns lock to lock
Brakes
Front 10in (254mm) ventilated front discs
Rear 10in (254mm) rear discs
ABS Standard
Tyres and Wheels
195/50 VR-15 on 6 x 15
Dimensions
Track - Front 56.5in (1,435mm)
Track - Rear 56.3in (1,430mm)
Wheelbase 97.2in (2,470mm)
Length 159.4 (4,050mm)
Width 65.7in (1,670mm)
Height 52in (1,320mm)
Unladen Weight 2,423lb (1,100kg)
Performance
Top Speed 124mph (200kph)
Acceleration 0-60mph in 10.7 seconds
Overall 29 to 31mpg (9.1 to 9.7 litres per 100km)
Equipment
Standard: Electric windows, alloys, front fogs and sports seats, pop up spoiler, MFA trip computer, tinted glass, and central locking. Electric metal sunroof, and central locking closing facility.