robbystick

Hi mate, i’ve Got one from someone else on the forum, the servo part number is ok, but there are two numbers on the master one matches mine but the other doesn’t so just trying to make sure, as there so many different ones. Cheers and merry Christmas, Rob

Thanks Mystic, I had a look at their website and seems like they do a really pro job but I,m short of dosh at the mo. Cheers Rob (Merry Xmas) :-)

Seasons Greetings and all that, I have had a look at my master cylinder and there is a yellow plaque with two numbers on it a shorter one on top and a longer one below that. Do you know which one might be the part number? Cheers Rob

Hi Lilfuzzer, I think I got a lift pump and sender from you about a year ago, you ok? Got a price including postage? Does it have the pipe on it? Thanks Rob

Thanks for the part number info, I know that very careful attention to these pays dividends in the end. Cheers, Rob

Thanks for the info, although it was kind an ironic question...... Cheers Rob

Ah! Not good. I suppose thare must be some company that can overhaul thse items , somewhere? I don't understand what is so specialised about these bits of kit that makes them unobtainable......

Hi everybody, Started up my project car: 2.0ltr 16v With abs - K reg, only for it to idle badly and smoke horribly. Found that brake fluid was being sucked into the engine via the vacuum pipe from the servo, master cylinder leaking from the rear seal. Trying to find a new master cylinder and servo (and pipe) with no success, anybody got any ideas where to get one or second hand units? Appreciate any help you can give. Rob

Great stuff, Thats the baby I need, what do you want for it my friend? (Inc postage etc) Cheers Rob

Dont know how this website works very well, so you may have got a reply already, but on the top of the sender unit just at the base of the electrical connection, there should be a part number starting with "535......." Could you check that for me please, cheers, Rob

Youre a fine chap to hunt this out, there is a part number on top of the sender unit, just at the base of the electric connector, should start with 535..... Could you check it for me please, Cheers, Rob

Hello lilfuzzer, Be great if you have, i take it you are holding lots of parts in your "unit"? I may possibly need injectors and seals if the degraded "rubber" has got through the fuel filter, unlikely but possible. Cheers, robbystick

Hi everybody, Another newbie to the forum, these little gems have quite a following and I am attempting to return my son's 1992/3 2.0 16v 185,000 miler to running, mot'd condition after he let it go green on his driveway (white car) unloved for four years. Reg is K528AMO anybody lnow this car? I have put a request on the wanted forum but dont know if i'm allowed to post there yet. It will be a labour of love and hard work, but that is what old mechanically minded dad's are for I guess. Anyway things to do list sf far: get it running (done that but discovered I need a new lift pump/fuel level sender assembly), fix spoiler, weld small accident repair, loosen up brakes......... And so it goes on

Hi everybody, New member, first post so be kind, I have undertaken a project and a half, my son's Corrado was sat on his drive for four years, so I have taken pity on him and will restore it to running mot'd condition. The lift pump/fuel level sender rubber hose and the big round gasket on the top have decided to melt, something in the fuel? Any way I need to replace these items any body got the assembly for sale ( or donation)? Cheers