mog-g60
-
Content Count
17 -
Joined
Everything posted by mog-g60
-
YES, IT DOES FELL LIKE IT HAS MORE PULL....
-
I HAVE JUST HAD A DE-CAT CUSTOM EXHAUST FITTED TO MY G60 AND WAS WONDERING IF ANYBODY KNOWS HOW MUCH BHP INCREASE THIS WOULD GIVE ME IF ANY? CHEERS MOG
-
I LIVE IN THE NEWCASTLE AND I NEED A NEW EXHAUST. ANYONE GOT ANY IDEAS OF WHERE TO GO AND HOW MUCH? CHEERSS :!:
-
my car stoped and the fuel pump wont run HELP ME PLEASE SOME
mog-g60 replied to mog-g60's topic in Engine Bay
Cheers lads will check tommorrow -
my car stoped and the fuel pump wont run HELP ME PLEASE SOME
mog-g60 replied to mog-g60's topic in Engine Bay
Cheers for the reply, but i have already checked fuse 18 it is ok. Also i have put a tester on connection to the pump and when i put the ignition on i get a current of about 9v. Any other ideas? -
i HAVE A G60 K REG I was driving along and just stoped. I checked the fuel pump and it was not priming or running. I changed the relay still no joy. then i connected a feed from the battery to the fuel pump and the car started and run. What i need to no is what else would stop the pump from running and how to test for it? ANY IDEAS WOULD BE GREATFULLY REACIVED. MOG :?:
-
here is a list of parts used== oil filter, cam belt tensioner, cam belt, poly belt& v belt== does anyone think the garage is to blame
-
add in yellow pages says, independent vw & audi specialists. and when i seen recommendation on here.
-
wwell any help is most greatfully recieved.
-
Yeah all bad luck. I was goin too get the g lader re built next week on the cheap buy my dad £180 for kit. i went to garage i seen mentioned on here. pitstop motor engineering in newcastle.
-
103,000 on clock. standard pully. Thing is only got car last month and done 1000miles. also was 20 min after i got it out of the garage (been in for service and all belts changed). just not my day :roll:
-
cheers anybody understand german?
-
have you found a g lader yet. As mine has just blowen apart, you are right it makes an big bang then a rattle. mine has gone exactaly same as yours :cry:. if you find a replacement could you let me no where you get it. Cheers
-
My g-lader has just blowen up i req a new or recon replacement. Anybody got any ideas?
-
will do cheers. do anyone know if they supply instructions with the kit? :idea:
-
cheers...
-
I am a new g-60 owner and want to diy rebuild the g-lader. What i need are instructions or detail diagrams. Can anybody help, also need info on best place for parts i.e apex seals ect. if i get the info money saved will go to my nos fund :mad: