WheelerDave
Members-
Content Count
67 -
Joined
Community Reputation
10 GoodAbout WheelerDave
-
Rank
Newbie
- Birthday 12/07/1971
Converted
-
Plus One
On
-
WheelerDave started following 1992 VR6 Engine Cover (Silver piece and black piece behind), Corrado VR6 Parts - Garage Clear Out, ABS Sensors - which ones and and 7 others
-
I still have this lot if anyone wants any of it? I don't want to dump them.....so they must be of use to someone? 2. Spoiler motor and everything that goes with it, other than one of the cables that I took off to use on the car. It is useful for spares. 5. Door shuts / step plastic trims - used. These are the internal plastic piece that goes inside of the rubber door trim. 6. Door shuts / step plastic trims - new and unused. Still in VW Classic packaging. Part number 535 853 369.These are the internal plastic piece that goes inside of the rubber door trim. 7. Door trims / bump strips - Full set for left, Rear small trim for right only 9. Cover that goes behind the front bumper between the bumper and the wheel arch. I only have one side, but can't remember which one it is. Part number is 536 805 965 10. Air filter - new and unused It's in a Mann Filter box - CU 2882. Part 507 44 0039 11. Inside window scraper (2 parts). Not sure which side its from.
-
Me too....I ordered the wrong parts - twice!
-
I still have the door sills, but note they are the inside ones, one the inside of the door rubbers, rather than the outer ones covering the metal step
-
Quick update: 1. SOLD - 4 x Speedline alloy wheels. Refurbished and unused. Already on eBay. 2. Spoiler motor and everything that goes with it, other than one of the cables that I took off to use on the car. It is useful for spares. 3. Engine Cover (full) - Silver VR6 cover and front and back black bits. All tabs okay, other than the slot at the bottom at the back of the silver cover. 4. SHOCKS SOLD, REST STILL AVAILABLE - Standard VR6 suspension springs, shocks (Monroe) and anti-roll bar. The shocks were only on the car for about 500 miles max 5. Door shuts / step plastic trims - used. These are the internal plastic piece that goes inside of the rubber door trim. 6. Door shuts / step plastic trims - new and unused. Still in VW Classic packaging. Part number 535 853 369.These are the internal plastic piece that goes inside of the rubber door trim. 7. Door trims / bump strips - Full set for left, Rear small trim for right only 8. SOLD - Rocker Cover Gasket - unused in packet (elring brand) - part 368 44 0470 9. Cover that goes behind the front bumper between the bumper and the wheel arch. I only have one side, but can't remember which one it is. Part number is 536 805 965 10. Air filter - new and unused It's in a Mann Filter box - CU 2882. Part 507 44 0039 11. Inside window scraper (2 parts). Not sure which side its from. 12. Solitude alloys and tyres. These are a bit rough, but fine to get refurbished or just use to store a car on (which is what I did).
-
Door step trims and rocker gasket gone to easypops. Rest if still available...... Thanks guys for speedy responses so far.
-
Hi, just had a look on VW Heritage and they are £54 each side - bloody rip off! But they are out of stock. They appear to be for all Corrado's. Looks like you can't get both of them anymore. Make me a sensible offer if you want them. Cheers. Dave
-
Yes, that's them!
-
Hi Guys I have a load of parts for sale, since selling my Corrado VR6. They will all go on eBay, but I just wanted to put them out here to see if they are of interest. The parts I have are: 1. 4 x Speedline alloy wheels. Refurbished and unused. Already on eBay. 2. Spoiler motor and everything that goes with it, other than one of the cables that I took off to use on the car. It is useful for spares. 3. Engine Cover (full) - Silver VR6 cover and front and back black bits. All tabs okay, other than the slot at the bottom at the back of the silver cover. 4. Standard VR6 suspension springs, shocks (Monroe) and anti-roll bar. The shocks were only on the car for about 500 miles max 5. Door shuts / step plastic trims - used 6. Door shuts / step plastic trims - new and unused.Still in VW Classic packaging. Part number 535 853 369 7. Door trims / bump strips - Full set for left, Rear small trim for right only 8. Rocker Cover Gasket - unused in packet (elring brand) - part 368 44 0470 9. Cover that goes behind the front bumper between the bumper and the wheel arch. I only have one side, but can't remember which one it is. Part number is 536 805 965 10. Air filter - new and unused It's in a Mann Filter box - CU 2882. Part 507 44 0039 11. Inside window scraper (2 parts). Not sure which side its from. 12. Solitude alloys and tyres. These are a bit rough, but fine to get refurbished or just use to store a car on (which is what I did). If you are interested in any of it, let me know and I can send photos. Thanks David
-
So I'm looking to replace all of the ABS sensors and sensor rings. There are 2 different ABS sensors for the rear for sale on the internet, lengths are 1062mm or 1220mm. The question is what is the difference? Also, are there any differences on the fronts? Looks like there is only one type for sale. I am not confident the ones on the car are correct so don't want to just compare to those. They do work sometimes, but are not reliable. I've got a 92 K reg VR6 and would appreciate any guidance..... Cheers
-
46 and had my current vr6 since 2015, first one in 1998
-
PM me if you want to do a deal. I'm not out to squeeze the last £££ out of you as the price is not unreasonable Cheers David
-
Hi Would you take £400 delivered to Bath (c£350 plus delivery)? Hope this doesn't offend, but I will need to pay for a refurb on one of them. Cheers David
-
I don't really know..... I replaced the brake pedal position sensor, the main plug into the abs pump also had a poor connection (which was the biggest bugger to track down as it was so random) and then it seemed like the pump only wanted to prime when it was hot / has been switch in in the last few hours. It seems like it just needed to be used more so the pump would prime The light does come on occasionally when driving but can be reset by turning off and back on again, so I think a wheel sensor may just be dirty or something. This seems to be getting less frequent though I'll see how I go and then perhaps get the sensors done at some point. I've also got a spare pump....just in case..... After 2 years of restoring the car properly it's great just be to enjoying driving it.
-
Celebration time......first day after 2 years ownership of the VR6 where I haven't had the ABS light on at all - yippee I can finally enjoy the car I'll upload some photos soon. It's come a long way from the Mike and Ed days.....
-
Thanks guys. I've got an 2x2 connector but the vagcom just won't connect. No idea why My gut feel is Vince will be getting a call. I don't want the whole eulogy to be able how I battled with Corrado VR6 gremlins for most of my life 😃