oooo

Is this car in the UK? as in one of the pic the wheel is on the left..

no, not in UK, in Lithuania..

Proof that you don't need to do a lot to a Corrado (externally) to get it looking very nice...

but you have to do a lot internally ;)

Looks well, good luck with the sale 8)

have some experience ? :D

Any more pictures of the engine bay?

What size alloys are they? It's sitting very nice on them.

unfortunatelly the car is a garage till next summer:) and I don't have many engine pictures when it's finished (below is still unfinished):)

wheels 17x8 +10mm spacers (to fit brembo) with 205/40 tires

hi, decided to post a few pictures of my corrado :) , it was 2.0 16V, now it's 1.8T, actually nothing special, but it has:

1.8T 225HP engine,

Brembo 4pot calipers front, mk4 calipers rear

Sabelt alcantara steering wheel, Recaro pole position seats

Wiechers roll over bar

etc.

I hope it won't change from outside, unless I get BBS CH or LM :luvlove: :)

what about other options - later 150 (AUM, AWU..) and 180 (AWP, AUQ..)

Can the stock engine handle :) that power.I heared thet pistons and rods are forgged?It is about 1.8bar

I have read something about that, that AGU internals are forged. crankshaft is forged, but I doubt that rods and pistons are also forged :D

1.8T 225 yes, including rods and pistons.

no-one running these calipers with 15's?!

S2 calipers with stock offset should be ok :!:

hello,

i'm also doing mk4 conversion. already have calipers, now looking for goodridge hose kit and pads.

what pads would you recommend? mk4 are too thick I think. there are different opinions abouk mk2 and mk3, so which ones are the best to fit? :)

maybe somebody has experience with wheels spacers? I have 17'*7 and i believe et is 38 and I think I'm going to fit FK ak coilovers this spring (to lower 60-70mm) and it realy needs wheels spacers. so the headacke is to decide what spacers to fit? :) 10mm -will it be ok?, or 15mm or maybe other options? :roll:

thank you in advance :wink:

KADVR6, I want to ask. can you go lower with these fk coils ?