rbbeng60

Has anyone got a wiring diagram for a g60 ecu. Just in the process of g60in my mk2 golf 16v . if anyone can help thanks :roll:

these are the ones ive got so far looking for the same as you all fag 6002 c3 c3=clearance 6003 2rs c3 2rs=2 rubber seals 6304 nu202 needle bearing 10-6879a needle bearing or a torrington bearing oil seals in viton 30x42x6 x2 30x45x6 30x52x7 20x35x7

hopefully after this weekend when we fit the mounts to a g60 i will be up and running and get some out there. if you are going to the stealth day i will be there with a set to get feedback.

although it would be possible for us to make solid front mounts we feel it causes too much stress on the front brace and engine to mount bracket. there are two grades of polyurethane bush harder than the ones we have chosen, but we feel we have chosen the best blend of comfort and stability, we may find after testing, alterations may need to be made and then further testing carried out before they can be put into production. we will update this post as we go with any further developments.

myself and dan (coolrado)will be at the stealth rolling road day on the 27th with mounts on his g60 and a spare set to show.so anyone going wiil be able to take a look.

Hears some picks of the front engine mount, ready to go on a g60 at the weekend for our first stage of testing. It’s a bit heavy ,but you could loose the weight by having a dump before you drive.:lol:

16v is on g2 platform so yes its also the same as g60, vr's are the same as mk3 golf platfrom.I have the same problem as you thats why im having a look at making the mounts. I don't want a solid mount but somthing better than standard.I will keep posting developments.

Thank to all for the encouraging comments ive done shit loads of drawings and come up with 3 good mounts for g2 platform. Once ive finished these properly I will move on to vr6 mounts so I might need some old one if anyone has any around to take measurements and start drawing again. Hopefully I will get these on the market ive had a lot of interest and I hope I will be able to supply them to g-werks as they have shown interest and are a honest company. I will keep everyone informed on the progress

that would be great if you could email me with it it would be a big help mailto:[email protected]. I should be finishing the front mount this weekend then some testing and some fine tuning. thanks for your help

just on the floor in my bedroom

work in progress

more picks of mounts

more picks of mounts

im moding my mk2 golf to g60 and my mate has a g60 corrado so were experimenting with these mounts

What does anyone think me and my mate (Coolrado) have been busy making some new engine mounts. Got the polys cheap from a local company and I made the rest in work out off 316 stainless steel . They might be a bit heavy but will do the job ,well better than the standard ones. Hears a pick of the gearbox mount