easygeezer
Members-
Content Count
39 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by easygeezer
-
I see what you are saying, I had forgot I could edit post too :D
-
I think you got to be sensible with the pricing, just sold my nugget yellow G60, full leather, well looked after, charger just been rebuilt, etc etc and got £2500 and that was a struggle
-
£6.95 delivered as per description
-
Hi I have an offer on for CF members of the Gates, Powergrip timing belts. £6.95 inc delivery. These are 12mm wide for extra durability, promotion will finish at the end of the month. If anyone is not sure what the belt is see http://www.easygeezer.co.uk and look on the "rebuild products" page payments can be sent direct via Paypal to mailto:[email protected] along with your address and I will get them out in 1st class post. Many thanks Andy
-
Don't know that I should answer that one
-
Its cold out there, I will summon up entusiasm and try running a hose through radiator
-
Have a problem, just replaced a coolant hose topped up water but appear to have an air block, or that's what I orginally thought but been working at it hours now.. Symptoms are car heaters stopped working, when I got them working bottom hose on radiator stays cold, with lid off expansion tank water is permanantly bubbling over, when I put lid on coolant pipes get real pressurised but bottom pipes staying cold. Temp light flashes permanently even though at correct level. I'm thinking thermostat but it was replaced last month, Ive done all the usual stuff, refilled via top hose, etc etc, any ideas please?
-
sorry should of said, G60 it's a Bosch
-
Hi, today I broke the plastic part on my alternator (Don't ask) that holds the brushes and need a complete replacement part. The local parts shop require a number and all I can read is 11????28 as the other numbers have worn off, can anyone help with this please :cry:
-
I'd happily swap my 17's for a set of BBS 15's
-
I had a 16v and went from the 15" - 17" what a mistake, accelerated slower and engine did not have enough grunt to pull top end, struggled to get over 120mph. My friend had a 16v Jetta, before we would race and we were side by side, afterwards he definitely had the edge. What do they say, "Big wheels for show little wheels for go"
-
looks like I have broken the plastic rod that controls the microswitch that the lock touches when it rotates DOH
-
HI I hope some of you may be interested recently I set up a website http://www.easygeezer.co.uk specialising in G60 bits and pieces, very early days so hope it to grow and maybe look a bit more proffessional as and when time permits
-
Hi, the drivers side door and ignition were on different keys so I took the barrel of drivers door inserted ignition key and cut off the bits that stuck out, I now have a problem in that central door locking does not work anymore, it must be something that I have put together wrong in the handle, what works it from the handle, I can see where the wires go in but there are no moving parts going to this area ? I,m guessing I have lost something, just to confirm if I jump the wires in the door panel it all works ok so it is definitely a handle problem.. Ps if I don't get it sorted Mrs is gonna kill me :D
-
Hi recently fitted new chip and pulley from G-werks and now have the following problem: Have noticed since changing chip and pulley that when I am giving it some, say 6000 rpm in third then back off the accelerator it gives a violent jolt as if you had stabbed pedal, let off then stabbed again before decelerating as it should. Just wondering if anyone else has had any similar probs or has any ideas what it may be? Before anyone says, Darren from G-werks is on the case but I thought it was worth asking you guys too :)
-
It is looking like a fault with motor, I do have access to another, has anyone taken one out as I have had a look and not sure where to start to get it ..
-
Hi, my rear spiler has just stopped working, goes up automatically but wont go down, it jiggles a little on switch if I move it up and down but thats it.. I have wound it up and down manually and it all moves very smoothly, I can wind it down manually then raise again on switch but it still will not go down again, any ideas anyone ?
-
Coolrado you are a star, that is exactly what had happened, problem now solved :-) Dines thanks for the offer ..
-
Will have the clocks out and have a go ...
-
When I jump wires on black sender red light flashes on dash but guage does not move, any ideas anyone ?
-
68 mm Pulley, RS -3 Chip and Bypass Valve Kit Bar-tek Motorsport are selling all of the above for £102.00, has anyone had any experience with their chips etc ?
-
UP "Just incase someone has the answer and has not read it"
-
No they are in Germany
-
If Ive missed out on a sticker I feel a complaint coming on :-)
-
it's never so much as lifted..