Lanceevox

I want to get a momo knob to match my wheel. How do you replace the knob? I tried unscrewing it but it would come out because of the leather surrounding. I need a HOW TO on removing and replacing the shift knob. THANKS!

I know what you mean. When I first got my rado all I would do is jump starts from stop signs and fly down the freeways at 120. Now I learned to restrain my self but my gas is still hurting me for some reason. -Where can I get a short shifter for my rado? How much are they and how hard is it to put in?

Yeah, its terrible when I am in the city, and not that much better on open road about 23 mpg. I am not sure what the issue is but it hurts my wallet, gas went up to $2.50 a gallon.. I guess you europeans have to pay like 9 buckaroo's a gallon though.

Is yours a G60? Mine eats up the gas.. I averaged 15mpg today.. but I do alot of commute, stop and go traffic..

What do I need to lower my car? Just some koni springs? I don't know the legistics of it.. Also what is the biggest rims you can fit without making body mods on a corrado, and without rubbing.. I really like the look of those rims that have deep lips and stick out of the wheel wells a bit. Also, where can I get a 90mm front lower black lip?

Yeah my tyres do rub against the wells a bit, when I go into full lock it is pretty bad. What are my options for tyre hieght? If I get thoses little rubber band ones do you think it will look good?

Here is my 92' Corrado VR6 w/ original red (tornado red?) paint. I could not upload the pics because they were to big so here is a LINK---> http://pg.photos.yahoo.com/ph/lanceevox ... 39&.src=ph Please give me feedback+suggestions to make my car look more aggresive or sporty.

I finally fitted mine some what proper. Although a friend was helping me with the heat gun to fit it and a dent formed while it was bending so becarefull!!! I used Apoxy to stick the ends down and it looks alright..Don't know what ill do with it once I get new headlights.

How do amps bring the power to all the speakers? I want to get a new cd deck installed and an amplifier to power the six speakers. Will it probably be cheaper to install them at the same time? Does the amplifier only connect to the cd deck and then the deck sends the power from there? OR does the amp have to connect to each individual speaker to provide more power? HOW DOES AN AMP BRING THE POWER TO THE SPEAKERS?!?! Thanks, Nick.

I am going to buy new headlights for my 92 corrado vr6. I have seen both of them on this website for sale http://www.tmtuning.com/main/html/main.html . It looks like they have everything you need to install them. I just want to know which one is better? Do they produce about just as much light? the EURO lights are about $500 U.S. and they ANGEL are $400 U.S. I think they both will look alright but which one has the better performance? Also.. If I don't upgrade the wiring will it not even be worth it? What do I have to buy to have functional, good, headlights?

How do you know if your cluth is going out? It seems like mine has been acting a little funny. Its hard to get into first.. I have to shake it alot and sort of muscle it in. Do I just have a bad technique or is it just going out?Sometimes it will go in smoothly but most the time I have to shake it around a bit or force it in.. Thanks, Nick.

But are there not six speakers in the corrado TOTAL? you know the ones in the dash, doors, and rear?

Is there some kind of adhesive that would be less perminent that I could put on? Because I am probably going to buy new headlights sooner or later.

I finally got my JOM Eyelid Badgless Grill... I was excited to finally get it but it seemed pretty flimsy when I took it out of the box. It only got worse. I realized it had extra plastic insert tabs on it, so I simply cut them off. I then tried fitting it again and it just wouldnt set right. The ends of the eyelid were sticking out incorrectly. Basicly it doesnt fit right. How can I modify it so it fits cleanly? I am disapointed I paid $120 u.s. for it... FUDGE!

I think I am going to have Best Buy install the headunit for me because they offer free installation besides extra wire/plugs. However I have another question I recently replaced the door speakers with higher watt speakers and now my system distorts at higher volumes. Is this just because I have a older headunit that won't support the speakers wattage? If I buy a new $300 headunit will it cure the problem or should I have them install an amp when I get the headunit installed just to be safe. I am also replacing the rear speakers in my corrado.

MY OLD STEREO THAT IS INSTALLED is a panasonic. I am prob going to get a Sony, JVC, or Alpine.

Panasonic.

No, I can't figure it out..

Panasonic... It's a CD changer deck from bak in da day.

I have the same problem as you pal. I can move it but I have to use every ounce of strength in my fingers to pry it down. Hopefully someone will have a solution for us. I do have more pressing issues then this though....

How do you install a headunit? Do I have to take apart the entire dash? Should I just take it to a professional shop and have them install it? I need instructions..

I tried to put some new lcd backgrounds for my gauges in my dash. I then tried putting it back together because I didnt have the time to do it and I wasint totaly sure how. The problem is that the black covering that goes on last wont go back in. The black part wont fit back in because it meets the actuall cluster at the bottom while it is sticking out an inch.. HELP!!

I have bought a pair of decent speakers for the back of my rado. I can't figure out how to install them or take out the old ones. Any hints or diagrams would be greatly appreciated. ALSO I have another questions about distortion: I installed some 100 watt speakers in the front door panels and ever since I did this the sound distorts. I have a pretty old cd changer deck and was wondering if the distortion is because the header (cd deck) does not put out enough power. OR maby I just fked up the wiring?

Craig, I just ordered a eyebrow grill from GOINGFAST off ebay. How does it look? Did it come in good packaging? You said it came in four days.. lucky you. I live in NORth California so I guess I am going to have to wait a bit longer even though it has almost been a week...

Is it possible to paint alloy rims? I want to paint my bbs rims with some kind of black frost because I have always wanted black rims and don't want to spend the money or time selling mine and buying expensive ones when mine are already pretty nice. Here is a picture of my rims. Is it expensive to get it done?