corrado_16v
-
Content Count
37 -
Joined
Everything posted by corrado_16v
-
i was just wondring if its posible to put a audi 20v out of the old quattro engine code 7A in to a rado with all the 4 wheel drive bits?? or has eany one done one and eany advice
-
Ive just done a full top end rebuild with a new gaskit and bolts i sorted out the CO at work cus it in runing lean and now it runs so sweet and ive had no problem with it so far. hope it all gose well for u dude
-
Ive just done mine it toke me 2 days to take the head off strip it down and rebuild it and get it all up and runing agen its not that hard as long as u got the right tools the exhust is a bit of a pain in the ass.
-
Ive just rebulit my engine and i was wondring what degree i shud set it to with a timing gun i know theres 2 diffent one to set it to but i cant rember witch ones thay are :)
-
I had the same sort of problem with mine and it turned out to be the dizzy the oil seal behind it gose the oil leaks throw the dizzy and the wires in side go brittle and crack causing a miss fire and if u leave it long enoth thay snap the u lose all power and the wont even start :( Hope this helps u and u get it sorted.
-
yeah thay are the ones thanks alot dude
-
just wondring if eany one can help me im looking to get new injectors for my 1.8 16v rado. I know u can get merc injectors but i cant rember with ones thay are.
-
no it dont as long as its not the heater mtrix cus after changing mine on my raddo i didnt fancy doing ti agen lol thx for the info :D
-
My gf has just got a mk 3 golf cl and when u put the heaters on hot all the windows mist up dose this mean the heater matrix is on its way out??
-
Heres a fow pics of mine :)
-
ive got red lights on my rado had them on for about half a year now and the old bill havnt stopet me but im going to try the green bulbs see how that gose :lol: but thay do look very nice
-
I see u sad uve got a spare exhaust cam as inlet fitted ive asket some ppl about this befor and didnt get very far what do u have to do to fit a exhust cam as a inlet ive got a spare one eany advice u got wud be a good help :D nice work on Garret its looking good its going to be nice when it all finshet
-
Ive just got hold on one for my 1.8 valver havnt fitet it yeat going to wait untill i recondishon the head i was just wondring what u lot thort of them and is it worth fiting :?: :?:
-
im half way throw changing the bushing on my rear beam ive got the beam off but what i need to know it how do u get the bushings out?? ive got the powerflux ones to put in and thay look diffent to the ones im taking out is this right?? has eany one else done it them selfs cus its alot harder then i first expected but why im under there going to change all the brake pips as well :)
-
I thort it might have to be some think like that lol il just look for some new ones for now
-
i was just wondring if eany one know were i can get hold of some smoket fogs and indercarors from :?: :?: Nick.
-
Have u tryed swaping over the ht leads?? even thow ur geting a spark it might just be a realy weak one so its not doing its job proply soem sort of thing hapend to my on my valver
-
I think il go with the CNC one ive been hearing so meany good things about them Bet that was good going round there work shop
-
Im not looking for the cheap way around it i want it done the best it can be do u have a contact for tham :?:
-
Im doing a strip down and rebuild on my 1.8 16v KR engine and was wondering were the best place wud be to take the head to get it gas flowed and polishet :?:
-
Theres a GSF down grafton street its easy to find thay tryed to sell me the gasket set for a 8v ive been looking on the ECP wed site and cant find it one there ive sent them an email to see if thay do one. That wud be sweet if u cud find out if he can get hold of one. im rebuilding the head and the rest of the engine my self i just need some one else to port and polish the head as i dont have the time right now lol
-
i tryed GSF and thay did not have one all thay cud get was the head gasket i cud do with one that comes with both 42 and 50mm manifold gaskets as i have both manifold as im still not shore what one i want to put back on.
-
Im doing a rebuild on my 1.8 16v KR engine and was just wondring if eany one know were i can get hold of a full gasket kit for it. All so were wud be the best place to take the head to get it ported and polishet??
-
definately cam belt tensioner mine was doing it and i changed it and it stopet but i put it back on cus i realy like the noice
-
sweet thx alot i just wanted to find out just doing afow little twicks to my rado befor santer pob on sunday :D