Jump to content

nathangt4

Members
  • Content Count

    7
  • Joined

Community Reputation

0 Neutral

About nathangt4

  • Rank
    Newbie

Converted

  • Location
    Slough (don't hold it against me though)
  1. I described the bit to the guy at VW and we have ordered the bracket and bush for both sides, £5ish per side, I will have a look. Thanks for the advice. Nathan
  2. Thanks, I was reversing up a kerb at a bit of a strange angle and I heard it pop out, if you look under the car you can see the ARB hanging down, from what I can see, it has popped out of the bush, the bush is quite rusty too so probably was about due to fail. I hope that clears my dodgy description up. Thanks Nathan
  3. Thanks for the replies, I think it could be the auxillary water pump then as that is the general area of the leak, I have only seen the water leaking from under the car not from the block but we worked it out as it was sitting in the same place and that is the area of the puddle on the floor. Thanks again Nathan
  4. Thank You, It isn't the bottle, it seems to be coming from the back middle of the engine if that makes sense :) Thanks Nathan
  5. Hello, On my Brothers VR6, it has a strange water leak, doesn't do it all the time and it appears to be coming from the back of the engine, we have done a pressure test which was normal and no leaks during the test. When it leaks it is a steady drip and can lose the whole bottle within a week maybe. There are no obvious water marks on the engine at all. Any help would be appreciated. Thanks Nathan
  6. Hi, My brother owns a 94 VR6 and I managed to pop the front Anti Roll Bar out of the bush , whoops :shock: . We are wanting to change both sides and I was wondering what type of job this is?, it looks straight forward but I own a GT4 and am used to things that look straight forward taking hours. Any help would be appreciated. Thank You Nathan
×
×
  • Create New...