canopus70
Members-
Content Count
17 -
Joined
Community Reputation
0 NeutralAbout canopus70
-
Rank
Newbie
- Birthday 12/12/1983
Converted
-
Location
Norway
Converted
-
Interests
Corrado...
Converted
-
Occupation
IKT
-
cool. :D take the headlights switch off and check if the wires has been messed with , as far as I know the headlights loom is not connected with the ignition wires in any way. Already checked that, everything seems fine..
-
Today I noticed that when the car has been running a couple of minutes the idle start to get pretty rough, it jumps up and down between 1500 and 2000rpm..Could it possibly be a vacuum-leak or something like that??My ISV is not connected...
-
No,the key does'nt have to be in the barrel..
-
When i turn the headlights it sometimes happen that the ignition turns itself on!? Anyone knows what this could be??
-
I can hear my exhaust leaking infront of the Lambda, could that cause these types of problems??Or could it be that the fuel-filter needs to be changed or cleaned??
-
After what i remember the ECU-hose is connected to the top nipple..
-
You're totally sure of that??That it cannot run without it?? This cable is located baheind the "throttle-housing" , and it's connected to the "vacuum-hole" nearest the ECU..Is this right??Or have i mixed the two of them up??
-
No it has been off for a few days, because i needed to change the "throttle-housing" (don't know how else to say this)..Do i maybe have to zero out the ECU to get rid of bad values or something??
-
Oops, forgot that:).. It's a G60.. Yup, that's my problem,but it also runs like shit at half throttle..It's only around the idle-area it seems to run fine.. Got any idea??
-
Seems like the problems has no end this time:(.. So here's my problem..When I start the car I can drive a couple of minutes when suddenly it "dies" when i hit the speed.. But when i let it go down to idle a couple of seconds (hit the clutch) it works for a few seconds again.. I maybe think that it could be the "fullspeed-switch" (don't know if it's called that in english, it's located between the inlet-manifold and the head,only switch there i think)..After what I've heard this switch "feels" when I push the speed and gives signals to the ECU..Could this be dead?? And is there any relay or fuses to this switch?? Or could it be a total different thing??
-
It turned out to be the switch:).. Thnx for all help..!!
-
Hehe,thnx:)..
-
If the fanswitch is broken, how fast will this make the engine boil??On idle.. And could the hot oil be prevented by my problems with the water??
-
It looks like the fan has some trouble coming on..So maybe the fanswitch is broken??And could this prevent the problems i got??
-
Hehe, hope it's not VR time;).. I'll check out the thermostat today and hope it's just that:).. Holder det alltid ekte:D..