sikaa1

Guys, Does anyone know where I can purchase a FUEL METERING UNIT for a 1992 (k reg) 2.0 16V Rado? A good second-hand or reconditioned one should do. Cheers, Sikaa1

Sorry guys, It should have read http://i32.photobucket.com/albums/d14/v ... use038.jpg http://i32.photobucket.com/albums/d14/v ... use039.jpg http://i32.photobucket.com/albums/d14/v ... use040.jpg Cheers.

Cheers guys. You can view 3 pics of the door on ; http://i32photobucket.com/albums/d14/voo51/house038.jpg http://i32photobucket.com/albums/d14/voo51/house039.jpg http://i32photobucket.com/albums/d14/voo51/house040.jpg Can anyone definitely tell if the card on a '92 Rado will fit on this door? i.e. Is this door off an old or new model? Sikaa1

I own a 1992 2.0 Rado which needs the passenger door replacing. Managed to locate one from a later model - '95 - and want to know if the door card (& ancillaries) are interchangeable or do I need one from the same year? I'm sure I've read it somewhere about similar body panels on all models but not too sure about inside trim etc. Help!

The ABS warning light on Corrado comes on somtimes when I apply the brakes. The light stays on until the ignition is turned off, and back on in which case it performs normally - i.e. stays for a few secs and goes off. ANY IDEAS??

Supercharged - "the plot thickens" ............................ Spent hours changing the abs rotor and wheel bearing and deleted all fault codes.........it hasn't made a blind bit of difference. Light goes off after approx 5 secs on start -up (every time) and comes on whilst the car is in motion. VAG-COM is telling us it's the drivers' side sensor..........Can't be (hopefully) a faulty connection because it goes off on start up (every time). Sensors, abs rotor and wheel bearings have been changed.......

Supercharged : Is there a way of detecting a faulty cage or is it just a visual check? Are they easy to replace? Cheers, Sikaa1

Supercharged: Can you determine the level of distortion and corrosion on the abs rotor cage? Is it fairly straight foward to replace? And another thing? ABS light only started playing up after I had the discs and pads changed!! Cheers, Sikaa

The light comes on when the ignition is switched on for about 5 secs and goes off - as per normal. It only comes back on and off when the car is moving. i.e. Normal on ignition/startup, problem starts only when the car is in motion.

Supercharged, cleared the codes over the weekend. Light still coming on. Still reading 1 fault - 00285 - ABS Wheel Speed Sensor: Front Right (G45) Changed the two front sensors about a month ago when I got the first reading. Any ideas??!!!

My local VW dealer reckons the BPPS is the same as the brake light switch. I need to be sure b 4 I start swapping. Any ideas?

Hi Guys, Thanks for your advice. Just a few more things! Supercharged - I suppose it will have to be plugged back into VAG-COM to clear the fault codes? Bigpants baby - How easy is to replace/sort the brake pedal position sensor? 16-00 Signal Outside Specifications 04-00 Mechanical Mulfunction Are these related to the two above? Cheers, Sikaa1

Hi Guys, Just had my corrado plugged to VAG-COM (due to the ABS warning light coming on intermittenly)and came out with the attahed codes. Can anyone out there explain them in plain english. I've also had the two front brake sensors changed recently and it hasn't made a difference. Light still comes on when I'm driving. Goes off on start-up after 5secs and comes on / off whilist driving................HELP!!!! Cheers, Sika Here are the faults from VAG COM Monday, 01 May 2006, 12:34:55 VAG-COM Version: Release 409.1-S Control Module Part Number: 1H0 907 379 Component and/or Version: ABS Software Coding: Work Shop Code: 4 Faults Found: 00285 - ABS Wheel Speed Sensor: Front Right (G45) 35-00 - - 00285 - ABS Wheel Speed Sensor: Front Right (G45) 16-00 - Signal Outside Specifications 00285 - ABS Wheel Speed Sensor: Front Right (G45) 04-00 - Mechanical Malfunction 00793 - Brake Pedal Position Sensor (G100)