leederg60

its going to garage tomorrow night but i just wanted to get an idea as a lot of garages haven got a clue bout the g60 engine! Thanks ill get em to ckeck timing :D

Tried starting car today and have to put foot to floor to get it going, when it starts you get a few pops then it races up to bout 3000revs then drops and dies?! Any ideas anyone?! thanks :(

Yea i can fully vouch for my boys down at alltech that there work is fantastic, you will all soon see another picy thread of my g60 all finished and painted!! Oh yea this vr is quick and sounds oh so sweet, you need to get a video up ben wit sound!!

dont ruin your g60 by putting a 1.8t engine in especially on those bhp figures(way too high, revo figures by any chance?!). If you want to have a rare car keep it g60!

First mod mate is get the charger off and get darren at gwerks to service it before it goes pop on you!!!

Way to test is start engine, then one by one pull off the leads if itn gets worse put that one back on, if no difference you have found your missing cylinder! Take the plug out on that cylinder and check if full of carbon, if it is try new plugs and if still nothing borrow a HT lead test light! Sounds a lot but ten mins work really. hope helps

only reason they rust is cos of the dam genius holes VW decided to put in the panel! proper way is to take badges out, grind down to fresh metal inside and out, etch prime then re paint that whole rear piece! most bodyshops thats prob bout 100quid all done

You definately want to change it now cos if those bearings fall apart the belt comes loose and comes of sending your charger all over the place!

Probably will be the plastic idler pulleys just changed mine with new ones sound sweet as a nut!!

This is true a man of wisdom ANDY947 good stuff to use is upol Acid 8!

I saw your car down at gwerks mate didnt look too bad but cant see how its £2600 worth of damage, although things are always worse underneath aren they! did darren show you the pics of his plans for the TT?!

At least you bought some decent cables not the autoleads crap most people use!!Will sound sweet fitted a set of them components in an alfa gt with the same skins and cables but with audison amp, BEAUTIFUL was the customers description!!!

nice job but to make life easier for others you only need to prep with 500grade paper when using silver and you can use 400grade on solid colours!

Muff Love going out to the Alltech MASSIVE! Well get cracking on your bumper next week if ya like?!

Have you changed the regulator?!