Jump to content

leederg60

Members
 View Profile  See their activity

  • Content Count

    33

  • Joined

Everything posted by leederg60

  1. leederg60
    its going to garage tomorrow night but i just wanted to get an idea as a lot of garages haven got a clue bout the g60 engine! Thanks ill get em to ckeck timing :D
  2. leederg60
    Tried starting car today and have to put foot to floor to get it going, when it starts you get a few pops then it races up to bout 3000revs then drops and dies?! Any ideas anyone?! thanks :(
  3. leederg60
    Yea i can fully vouch for my boys down at alltech that there work is fantastic, you will all soon see another picy thread of my g60 all finished and painted!! Oh yea this vr is quick and sounds oh so sweet, you need to get a video up ben wit sound!!
  4. leederg60
    dont ruin your g60 by putting a 1.8t engine in especially on those bhp figures(way too high, revo figures by any chance?!). If you want to have a rare car keep it g60!
  5. leederg60
    First mod mate is get the charger off and get darren at gwerks to service it before it goes pop on you!!!
  6. leederg60

    dont sound right

    leederg60 replied to B4LJX's topic in Engine Bay

    Way to test is start engine, then one by one pull off the leads if itn gets worse put that one back on, if no difference you have found your missing cylinder! Take the plug out on that cylinder and check if full of carbon, if it is try new plugs and if still nothing borrow a HT lead test light! Sounds a lot but ten mins work really. hope helps
  7. leederg60

    Paint Job

    leederg60 replied to Fingers's topic in Exterior

    only reason they rust is cos of the dam genius holes VW decided to put in the panel! proper way is to take badges out, grind down to fresh metal inside and out, etch prime then re paint that whole rear piece! most bodyshops thats prob bout 100quid all done
  8. leederg60
    You definately want to change it now cos if those bearings fall apart the belt comes loose and comes of sending your charger all over the place!
  9. leederg60
    Probably will be the plastic idler pulleys just changed mine with new ones sound sweet as a nut!!
  10. leederg60
    This is true a man of wisdom ANDY947 good stuff to use is upol Acid 8!
  11. leederg60
    I saw your car down at gwerks mate didnt look too bad but cant see how its £2600 worth of damage, although things are always worse underneath aren they! did darren show you the pics of his plans for the TT?!
  12. leederg60
    At least you bought some decent cables not the autoleads crap most people use!!Will sound sweet fitted a set of them components in an alfa gt with the same skins and cables but with audison amp, BEAUTIFUL was the customers description!!!
  13. leederg60
    nice job but to make life easier for others you only need to prep with 500grade paper when using silver and you can use 400grade on solid colours!
  14. leederg60
    Muff Love going out to the Alltech MASSIVE! Well get cracking on your bumper next week if ya like?!
  15. leederg60
    Have you changed the regulator?!
  16. leederg60
    They did do a4 wheels i think that looked like s3 wheels but were 5x112...crazy but thats audi!!
  17. leederg60
    KAROLIZyou cant fit anything bigger on 4 stud hubs than 280mm g60 discs but u can change caliper to the tt ones or you have to go twin pots. or 4 pots
  18. leederg60
    To be honest if the car is sprayed in a booth it does not need to be mopped with cutting compound but yes if you paint in a dusty enviroment you will need to wet flat with 1500 then mop it with g3 cutting compound to get the finish. The recomended mix for 2k paint is 2:1 thats paint to thinners and laqcuer is 2:1 +10%thinners thats laqcuer to hardener+thinners. Hope helps
  19. leederg60
    They look sweet any ides on dollar?!
  20. leederg60
    Sounds like someone didnt like being called expensive.... :roll:
  21. leederg60
    Well my body shop suggests 5litres for a full respray so 2 good coats of base and 2 good coats of 2k laqcuer. that way will last and look fantastic!!
  22. leederg60

    G-WERKS

    leederg60 posted a topic in Suppliers Forum

    Would like to say a huge thanks to Darren at Gwerks, top bloke sorted me out with a nicely refurbed stage 4 charger!!!The absolute muts nuts!!! THANKS DARREN!!! cheers martin
  23. leederg60
    No not yet buddy am still trying to work out how to use these forum things!!!!
  24. leederg60
    Well naturally if i said it was 130 i would be talking bout kph :wink: not bad for a 1.4 hey?!
  25. leederg60
    HAHAHA your all wrong so far....you need to go higher much higher>>>>>>
×
×
  • Create New...