Matty Newquay

Sorry it is a mk 4 polo! theyre just a set of coilovers i bought off ebay that are currently on my rado, just wanted to know if i could put them on a polo! Cheers

Ok will my coilovers fit onto a s reg polo i think its a mk 3 polo any ideas?? Cheers guys

Anti Roll Bar Bush's!!! How hard are they to replace? The drivers side on mine had split after being stood for a yr, i've done all the work for it to pass mot but this was a advisery, I'm wondering if theres a certain type that will make a difference or if its worth just sticking to the stock part! I've got coil overs on there front and rear and its dropped about 100mm on the front with 15inch bbs split rims with 195/50/15s on! Any advice would be awsome Many thanks Matt

Cheers dude! Yeah hopefully it should pick up soon though! Maybe this weekend!

Some cheesy r+b vid i had to borrow a music dvd off a mate abd its full of r-kelly and people like that! Just wanted to show it working really!

Well its defo worth thiking about! I'l have to search for some tuners down this end of the country!

Lol no i dnt wanna spend all that!! So if i sourced a 2ltr bottom end would i need to also get the ancilliaries off that engine or will mine just bolt into place!! Where is this stelth place?

Had a go at putting a screen in the center console i think it looks ok! Wat does everyone else think?? Taking the center part out! Cutting enough space for it to fit into!! Part removed! Then fitting it back into car! I located the dvd driver on the shelf under the glove box! It took a little cutting! Now it all works fine. Yes i know i need a black headunit! The silver one stands out so badly!! Cheers

How much work does that involve? And what needs to be changed to put a different bottom end on? Cheers

Cheers for the advice! I relaced the coil and all the leads and rota arm about 2 months ago so they're all good! Same with wheel alignment, thats was all set up after i changed back to 15's cos i dropped it some more. Any ideas wat a 1800 valver should roughly be producing bhp wise?? Cheers

Okay i was just wanting some advice really! I have had my rado for about a yr now and just want to make her a little faster! I've gone back to bbs 15 inch wheels so its a litle faster off the mark! I have a k+n pannel filter with a driled air box A straight through stainless exhaust from mainfold to rear silencer i think its 2.5 thick Is there any other simple mods i can do to improve the performance? Cheers guys

Hey man thats pretty much the same as mine! And u will fully notice the differance! Mine is only for main or full so i put it on main and its almost better then the full beam! Alot brighter! And also super easy to fit!

Mine is a j plate and is only a 1.8 16v! I also need a new passanger wing so which one's will fit??? Cheers

I have a set of hocks on mine now! But the off set is either 35 or 38, i have coil overs so its lower than a 40mm drop, but because of the rubbish off set i'm having to run 10mm spacers so the weels will clear the coil overs inside the arch! its fine on the rear! But i wanna go lower on the front but beacause of the 10mm spacers i cant! Sorry just had to have a winge! oh yeah tyres are 205 40 17 on the front And 215 40 17 on the rear! And i'd say the drop ive go is between 70-80mm

Can someone explain to me how the air box works in the 1.8 16v Rado?!? I mean gubbins that come off the top of the box!?! Cheers