john2k

Shame, When did you go look at it out of interest?.

Real old post but wanted to track this one down, did it sell?

ive been qoated a fantastic price from a fella on the bay. but before i get them made up i need a little technical help as i dont wont the wheels coming off on me. specs as follows: VW 5/100 pcd 57.1 center bore to BMW 5/120 pcd 72.5 20 mm center bore at 15mm thick. there telling me to bolt the adapters up with normall m14x1.5 bolts from my local hard ware shop,but this sounds bit yehar to me.Ive used adapters/spacers before and they always bolted up using milled down wheel bolts and the adapters have never been less then 20 mm thick. not to sure to get them or not?

Im trying to find a set of adapters to convert some bmw 120x5 wheels on to my 5x100 vr corrado, ive been qoated a fantastic price from a fella on the bay. but before i get them made up i need a little technical help as i dont wont the wheels coming off on me. specs as follows: VW 5/100 pcd 57.1 center bore to BMW 5/120 pcd 72.5 20 mm center bore at 15mm thick. there telling me to bolt the adapters up with normall m14x1.5 bolts from my local hard ware shop,but this sounds bit yehar to me.Ive used adapters/spacers before and they always bolted up using milled down wheel bolts and the adapters have never been less then 20 mm thick. not to sure to get them or not? :confused4:

sorry forgot to mention wanted some fk ones.

im looking for some PCD adaptors that will convert my vr hubs from PCD 5/100, 57.1 centre bore and 14x1.5 bolt hole to, PCD 5/120, 72.5 centre bore and 12x1.5 bolt hole. any one know were i can get some??

got my hands on a set of BBS RS 061 16"8j from a e30 m3 i want to get a set of 5x120 to 5x100 adapters and a pair of shallow dishes for the front wheels. Really could do with getting the adapters first to see how much the arches need stretching but dont fancy spending much more then 150 on them.

I already have a set of new pistons rings and pins that i got off ebay there standard 2.9 pistons just need a AAA block.Got hold of stealth Friday and was qouated £200 inc vat for the reboar.Phoned my local engine shop in Reading and was told 240 + vat and tryed one in slough and was qouated £100-£120.Sounds too cheap to me but could be worth a look.

ok am i right in thinking the only diffrance between a VR ABV 2.9 and a AAA 2.8 block is the bore diameter.As im looking into overhauling the engine soon and want to get a 2.8 block bored out to a 2.9 .Does anyone know of a decent engine shop were i caould get this done.thanks