Fasteddie

LOL the weight of the flywheel will have no effect on bhp at all :wink: stick to your day job

I run a Mocal oil cooler great job if your doing 70mph all the time :-P Engine Bay finished :D Below . Oil Cooler fitted engine bay not finished :(

Right What i Would like to know is how well Corrados go, to say a mk2 16v /mk1 8v ,Does the extra Weight hurt them , How well have you found your rado on the track ? I have a 2 litre 16v with a Strong head kr cams german race exhaust Manfold and downpipe also running Vr power cat and Race flywheel not run in yet :( not sure it will give me what i want :!: . gearing is not as nice as the mk2 gti's which i think can only hurt :( Right what have u found ? and what sort of power is your 16v getting to the wheels ?

Standard is around 20 to 22 i think .

Need Any help you can give me on Lightening a Corrado 16v flywheel ,What weight is yours ,looks to be a fair bit you can take of the back looking at the one i have :roll: Thanks .

:mad:

:evil:

More head Pic,s :unsure: Getting there :) Inlet :mellow: . Exhaust :mellow: . . Volkswagen Cams :-P :roll: . New seals fitted and got me a new starter free :)

flat bench which i like better than the arm rest ,Every one to there own Have never would never have anyone in the back ,for a coat only :lol:

Yes i am very happy with the interior ,Just got a new set of vag gray mats today to to keep it right ,I am thinking of droping the engine out for all is left of it 8) and do a we bit more to it ,It never ends :cry: I am weak :wink:

:cry:

:!:

8)

We bit more done :? .

:mad:

No not a le mans car a mad mans 6R4 metro rally car :twisted:

There you go exhaust ports :) Thought i would take a photo of my brakes ,as they have not been out of there bags in a fair bit :wacko: Will need to run 17" wheels to fit them also have a set of G60 280mm to run my 15's :) Got the fuse box sorted out for the 16v looms and sorted out a few we things inside :) ,16v clocks and that not sure about the white clocks :mellow:

Thanks for feed back .

WOULD HAVE BEEN FINISHED ONLY I BOUGHT A CORRADO ! SEEN ON HERE .

:mad:

Don,t know ,say made in germany on the back but no name :? BUMP new pics

Corrado 2 litre 16v Strong head and Kr inlet cam cat bypass will see 145 bhp to the wheels and you can rev the crap out of it and it will hold together ,G60 yea a chip and a 68 mm pully as small as you want to go ! but they all go bang don,t take the stick :( Bottom crank shaft pully comes lose on G60 as well Not good ! Better with a 16v :D

The two screws already in place are for ABS plug brackets .

If your timing is set up right and C.o is ok (check fuel pressure and control pressure are ok aswell)16v should run well enough with out k star they don,t need it unless your cr is way high If the head has not been skimmed to death and all is well with the fueling there is no reason why you car should pink if set right I set them up all the time and have no problems Edd. P,s lack of fuel can cause an engine to get hot and pink pull the injectors out ,jump the fuel relay and lift sensor plate put the injectors into 4 clear bottles they should all have the same fan and deliver the same amount in all the bottles hope this helps :wink:

Bought this about a month ago,It found its way to belfast Ni about two years ago and was parked :( Car is a 1992 2 litre 16v with ABS has FSH and came with Full new Koni kit ,Race head and and Kr cams and cat bypass ,and a very odd high spec alarm . Also has a real good sound set up and sound shelf :D Inside is mint ,The guys wife wanted it out of the drive ! Has not been mot'd in two years and needed abit of a wash Very cheap Corrado :-P my first as i am a mk2 golf man ! 2L 16V This is the car the day after i got it ,when it was washed and wheels where cleaned (took long enough to clean wheels !) ...................................................................... Also my golf i have yet to finish one day :oops: ....................................................................... Nice and standard ,1991 golf gti [German edition spec car] with full e/Recaros ,Vortex consul , Anniversary gear knob .BBS steering wheel, Full carpet boot trim ,Headlight washers ,E/mirrors E/windows bbs wheels , Also 17" wheels.New konis all round with eibach springs and eibach Anti roll bars ,poly bushed ,upper and lower alloy adjustable strut braces ,goodridge brake lines 280 mm brakes ,mk4 rear brakes ,23mm VR6 master cylinder new servo ,New engine looms sleeved Photos of build still to come along with engine build . The inside of the car when we got it :blink: after a quick clean ,alot more done now :) pic,s soon ,,Vortex consul and Anniversary gear knob along with bbs steering wheel and other bits :D After a few weeks in my garage the engine had fell out :( Bad mounts me thinks ,,will buy new ones and put it back in soon Other bits that fell of :( More photos to follow of the rebuild :D And the push Bike :twisted: RIGHT MORE DONE :D To the thing I am going to run the 17" wheels on to let me fit my standard brakes :-P Bits and bobs still to go on :oops: What mess :oops: