phil.16v
-
Content Count
16 -
Joined
Posts posted by phil.16v
-
-
very nice mate :) borbets look soo much better than the othersThanks mate think 17's where too big and modern these suit the year and have always wanted a set! :D
-
Looks good but could we keep to one thread please?viewtopic.php?f=11&t=72999&p=848823#p848823
Merging threads ...
Sorry mate new to all this thanks for the advice and help :?
-
Here's some pics of the latest mods to little red rado 1990 1.8 16V:
All red tail lights imported from Germany-
Borbet A's in perfect order snapped up for £250.
Debagged front grill-
Leather Interior coming soon! :clap:
-
not going to attempt a rebuild myself just write the cheque. Not running too bad just a bit lumpy ticking over just worried about the amount of miles.
The spoiler is working fine, sunroof just tilts though which doesn't really bother me.
-
Looking to rebuild my 1990 16v with 194,000 miles engine with a few new tweaks to spice her up.
As i am mechanically dumb has anyone any suggestions and a list of parts required?
want to do her right without spending an absolute fortune.
-
1990 1.8 16v so far............
and the tdi daily driver, 1996 tdi golf (only 87000 miles).
:D
-
-
raise it up.....smaller wheels.....stretched tyres....roll your arches.Have 17" with 45 tyres. Would spacers do or is that all wrong?
-
I have fitted AP coilovers (tight budget) to my 16v rado and tyres are rubbing, Whats my best option?
-
There's plenty of adjustable steering columns for sale used. The reason no-one buys new is price: £530 + VAT...You should be able to fix it - there's a pin that drops out underneath usually just need sticking back in. You might need to weld a small plate over the end of it's channel to keep it there.
Any pics as i am totally useless at these things? :nuts:
-
You'll need to drop the lower plastic shroud to see the main hinge pin. Sounds like it may have slid half way out, which can make the adjustment go for a burton. Excessive play is usually down to that, or a worn lock housing bearing. If you remove the steering wheel (24mm socket), you can inspect said bearing's health visually and by wobbling the column shaft.The fixed column comes from a Corrado, not a Polo.
I replaced my column for a fixed one years ago and it's been the most consistently good steer since owning the car. The height of the fixed column is the same as the middle setting of the adjustable.
The adjustable is a heavy, complex sprung ball / socket arrangement and when worn, you're buggered.
The fixed column parts cost about £70, inc the revised plastic lock shrouds.
I recommend the conversion unless you definitely want adjustment. I move the seat up and down instead :D
Where these new parts or second hand and where did you get them?
-
I have a problem with my steering in my 16v.The height ajustment only seems to have 2 positions up full or down round my knees. Should there be in between positions. Also once in either position there is alot of up and down play. Can anyone advise on how to fix and what parts are required
-
-
-
Nice car mate looking good with new mods!
Just purchased red 16v rado and have ordered same grill and all red tail lights.Was the grill hard to fit and where did you get your coilovers.
I am still deciding what sort of wheels to go for but will probably go for something deep dish.
Keep it up and keep the pics. coming too
my 16 valver
in Members Gallery
Posted
Keep on posting have a 16 valver myself and i am looking for ideas.