LucCorrado
Members-
Content Count
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by LucCorrado
-
No disagreement... The original connector became brittle. Now you see the condenser, can you suggest where its value is mentioned? Sent from my SM-G973U using Tapatalk
-
Attached pictures showing the location of the condenser and the applicable wiring diagram page from the Factory Repair manual. This is a VR6 1992. The condenser is short circuited, and the surface label unreadable. Sent from my SM-G973U using Tapatalk
-
Attached pictures showing the location of the condenser and the applicable wiring diagram page from the Factory Repair manual. This is a VR6 1992. The condenser is short circuited, and the surface label unreadable. Does that help? Sent from my SM-G973U using Tapatalk
-
Hi Cressa, I am in the US. Thank you for the precision for AAA in Mk3. Can you suggest where I should route my question so I find the appropriate crowd?
-
Hi Dox. I am aware of the RHD I lived in England way back. Yet I would think LDH or RDH ABS systems have similar design to handle unwelcomed wave hence the need for the condenser. Could you tell what condenser is used on LDH model?
-
On Page 201 of the Wiring Diagram for CORRADO starting in 1992 Engine Code AAA there is a reference C17. It is a condenser present on each speed sensor negative wire. Where is the VALUE of C17 given? Incidentally if someone knows its value that would help. Thank you.
-
Looking for the rear water jet nozzle 535 955 985. This part# includes a pipe and a cap. I ONLY need the top portion or CAP of part reference number 22 in : https://volkswagen.7zap.com/en/rdw/corrado/cor/1989-76/9/955-234000/
-
Thank you for the info. This part is out-of-stock. Will keep looking. Sent from my SM-G973U using Tapatalk
-
My VIN# requires part# 3A0 955 435 as the CAP that re-directs the water jet from the rear wiper nozzle onto the inclined rear glass of a SLS 92. I am looking for a new or used part available to buy. Thank you.
-
In the rear cover for tunnel (535 864 263) there is a support for a bulb socket and there is also a blank insert in the rear ashtray (321 857 961) facing to that support. Has there ever been a light installed there? If so, 1- What are the part numbers for the bulb and its socket holder? 2- Which wiring diagram shows its connection to an electrical harness? Thank you
-
Looking to replace a broken Front coil spring on a 2.8L VR6 SLC, 1992. The color code on those in place are ONE GREEN and TWO BROWN paint marks. The part number for this spec is 535 411 105A. Incidentally, I will be curious to know the differences between those installed on a 2.9L and a 2.8L. Thank you in advance.
-
Hello! Looking for a vacuum pump that will work on a Corrado SLC VR6 1992. Mine is 1H6 907 325. Thank you.
-
WTB: Parcel Cover RETAINING STRAPS 535 863 447A
LucCorrado replied to LucCorrado's topic in Interior
Thank you a bunch for the tip. Order is being processed. Best! -
Looking for a pair of straps in good working conditions that hold the parcel cover to the hatch trim. CORRADO SLC 1992.
-
WTB : Hose for exhaust recirculation - Part # 021 133 518 B
LucCorrado replied to LucCorrado's topic in Wanted
I found one thank you. Sent from my SM-G950U using Tapatalk -
Hello, Looking for part #13, to fit a 1992 SLC VR6 2.8ltr. My hose melted because it was NOT installed properly. Here is a link to the part I am looking for: http://www.jimellisvwparts.com/products/Volkswagen-VW/Connecting-hose/5123645/021133518B.html Thank you.
-
I PM to purchase it. Sent from my SM-G950U using Tapatalk
-
Thank you. Will have it checked. Will get back to you tomorrow. Pls hold it. Sent from my SM-G950U using Tapatalk
-
Ok, I am interested. Just need to confirm if it is a E or J version of 535 837 205. Thank you. Sent from my SM-G950U using Tapatalk
-
WTB: Drive side (left) Exterior Handle 535 837 205 E
LucCorrado replied to LucCorrado's topic in Wanted
I PM You. Still learning how to use this app. thanks. Sent from my SM-G950U using Tapatalk -
Looking for the Driver Side (left) Exterior Handle for 92 SLC, part # 535 837 205 E.
-
WTB cross member with no rust or damage for a VR6. Is there one available?
-
Looking for the LEFT guide for a sliding steel sunroof with tilt. The part is 1H0 898 015 A for a VR6. Will take a whole assembly if available, not interested in motor.