rjm3

Stevemac..when you push on the mfa button position 1 with engine running ..holding the button shut engine off...start engine still holding button ..let foo button push once the map number comes up...According to shop manual this has to match a specific number..scroll thru (or push button) and it gives other nos. that correspond to the country of origin , vacuum and boost nos., speed sensor output nos...etc...I'm trying to find out what reference the first no. map means???regards jerry

When you say reconditioned...what does this entail? thanks jer

On my 91 g60 with auto..my map number doesn't match the factory number for the MFA/1...says to replace the whole circuit board mine is a VDO..any thoughts???thanks Jer

help my odometer and milage is going beserk!!! Do I have to replace the whole unit? thanks for any help jerry

I've got 90 G-60 with electric windows...got broken into...the used glass I got has two fasteners...while the one that is broken is glued to a roller track with two bolts holding to the verticle lift support....the junk yard swears they are all the same please help....

thanks for the quick reply...is it some sort of map sensor?

Hi question fafactory manual says the vacuum line from manifold to digifant has to be exactly one meter 3.5mm id no longer no shorter...is this true and what difference does it make?? 91 g60 8v..thanks Jerry

sounds like a vacuum leak..or the idle air valve is dirty...cleaned mine helped greatly..many threads on this regards jerry

hello again this may help...found the brake booster check valve bad ..vaccuum valve ...part of the problem both mts shot hyrraulic...pcv elbo like silly puddy replaced...base timing checked and reset....problem cured yea thanks for all the help and suggestions....now to fix the speedo droping to 0....regards jerry

thanks Dan it would be greatly appreciated...regards Jerry

John thanks for a quick reply...Do you know the specs on the speed sensor by any chance? Is there a particular wire or pin on the plug to the dash unit to check the signal ? any help is greatly appreciated...regards Jerry

hello can anyone help? my speedo will just drop to 0 and return again to normal...I have a 91 g-60 with auto 1.8...thanks for any help...

Hi I need help...Can someone explain the way to service my 91 g-60 1.8 automatic transmission? Any help would be greatly appreciated...I am a newbee to the forum...regards

thanks for all thoughts...idle or revs stay the same...going to block the vaccuum assist tonight and see if it makes a difference...regards

No that hasn't been done But I'll do it right away..any thing i should be aware of? thanks for a quick reply...regards...ps as i depress the brake pedal further it seems to vibrate even more??thanks again