Jump to content

seanb

Members
  • Content Count

    22
  • Joined

Everything posted by seanb

  1. I'm in Leicester mate thanks for the offer but I have been finding it really difficult to swap the panels over I have tried once already but due to the age of the parts little pieces broke. So I'm after a complete unit that I don't have to touch. I have been told that a passat b3,Audi a3 94-99, seat Ibiza same age,seat cordoba and skoda Octavia. Thank u for the offer Regards Sean
  2. Cool mate sorry thought it was urs :) thank u for looking for me I will get in touch Sean
  3. Hiya do u know wot condition the skin is in I.e no scratches or dents
  4. As above I'm after a sunroof cartridge ie the full thing not just the panel it must tilt and slide Thanks Sean
  5. seanb

    G60 green injectors

    as above a set of 4 :) thanks sean
  6. i will have a look for you when i get in the car after work for the ecu relay mate
  7. ive got one they look great u just have to spray oil into the charger once every 500 miles due to removing the return feed other wise the charger will run dry sound good to :)
  8. The same thing happened to me as i was driving along it would horrible thenn fine then horrible again until one day on the motorway it just cut out :( tried new leads plugs dizzy the lot to find it was the ecu relay vw still have them its ran fine ever since
  9. seanb

    Spoiler problem

    is there a way to diconnect it short term so not to damage it further thanks sean
  10. seanb

    Spoiler problem

    i can manully move it i tried at dinner it seems free then i wonder if its the relay :(
  11. seanb

    Spoiler problem

    Bad news guys looks like things are a bit worst sorry to ask again went ot work this morning and again te the spoiler did not raise thought ice again but its warmed up a bit not and the spooiler has decided to do wot it want sometimes when pressing the button to raise it the spoile goes half way then stops and others it lifts all the way (same on automatic lift 45mph) and others it doesnt move at all :(
  12. seanb

    Spoiler problem

    on further examination i have found that it had frozen from washing the car a couple of days ago :) few was getting worried for a bit then ---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ---------- on further examination i have found that it had frozen from washing the car a couple of days ago :) few was getting worried for a bit then ---------- Post added at 03:32 PM ---------- Previous post was at 03:27 PM ---------- on further examination i have found that it had frozen from washing the car a couple of days ago :) few was getting worried for a bit then
  13. seanb

    Spoiler problem

    hi gaz not tried that yet thank u will try when i get home :) it sometimes goes all the way on the switch then others it doesnt i have sprayed abit of wd40 in to stop freezing again i cant remember if there is a spped sensor fuse for 45mph because it will not raise then either thanks Sean
  14. seanb

    Spoiler problem

    Hi Guys My spoiler is only going a little bit up instead of all the way i wondering would the cold have broke anything due to the ice it was working fine last night, hope its nothing serious. has anyone had this problem themselves kind regards Sean
  15. Quick update just to let you guys know firstly thank you for all your advice its been a great help :) i have removed the vac hose to the ecu to find it is 22cm to short pervious owner must have got happy with the cutters and on further inspection the other vac hose which goes in the back of the throttle body had seen better days. i have replaced both and it runs sweet again thank you everyone sean
  16. Hi guys really hope that someone has seen this or had this problem before because I'm stumped now :( I drive the car from cold and all is fine if the car doesn't move I put it under load and suddenly it runs horrible if I come to a junction it nearly cuts out or sometimes it does, and when I keep a constant speed the car suddenly judder's alot I feel Like a learner on his first lesson lol if I rev the car with clutch down it clears it until I keep the speed continuous again. The other thing is the car randomly revs itself when driving forcing the car to accelerate if foot is not on the clutch which is scary let alone dangerous This all started after a clutch change but it speared to be a coinsadence because I doubt that could cause as the clutch works great Parts replaced Isv ( not original due to price ) now running original again due to it not changing the symptoms Blue temp sensor Checked ecu hose and it appears fine Sorry for the essay Thanks Sean
  17. New little update Got a new rear G60 badge as the old one looked a bit worn New wishbones as the old ones were not in the best state One last clean before the new clutch new hand brake cable and coilovers go on How it looked last nite let the work begin Thanks Sean
  18. seanb

    Sunroof help

    Hi guys I have the normal problem with my sunroof and I am looking at getting a new one. The only problem is the person I'm buying a moon roof from has ask is there a difference between the early and late specs or did the sunroof stay the same Thanks Sean
  19. thank you mate its in the garage at the min should have a nice new update soon
  20. continued next lowering springs high low collecting a interior for my brother and this happened :( the wheels got refurbed wing mirror fixed :) how the car stands now comments welcome
  21. Hi guys here is my corrado G60 i saw it here forsale and it was local so took the risk and bought it how it looked when i got it home engine bay needed a clean bad after when i bought it the bbs wheels were given to me in the sale after the engine the interior needed some work old grey interior was badly ripped new interior from a vr
  22. seanb

    Exhaust help

    Hi guys I was wondering if anyone could help or had this problem them selves I have a Jetex exhaust in my corrado which was fine until the car was lowered now the exhaust is hitting the rear beam. Do anyone know of a simple fix or is it rip my new exhaust apart to change the pipe that goes over the beam Thanks Sean
×
×
  • Create New...