IJV77
-
Content Count
6 -
Joined
-
trung tâm tiếng anh thành lập công ty số điện thoại tư vấn luật http://luatngogia.net/ w http://tuvanphapluattructuyen.com/ nhac san cuc manh giới, hấp thu nguyên khí, liên tục không ngừng, pháp lực vô cùng vô tận. Đồng thời có thể từ trong nguyên khí Tiên giới lấy ra Thuần Dương lực, sau khi thiêu đốt, làm cho uy lực của đạo khí tăng lên.
Mà hiện tại, Phương Hàn không phải là Trường Sinh Bí Cảnh, lại có thể làm được điều này. Đây là chuyện kinh khủng cỡ nào?
"Chậm đã!"
Đúng lúc Phương Hàn tăng cường thực lực, Như Ý Tử đột nhiên nói.
"Sao vậy, Như Ý Tử, ngươi sợ à? Nếu như ngươi sợ mà nói...Có thể tự động rời khỏi Vũ Hóa Môn, sau đó nhận sai với ta, ta có thể tha cho ngươi một mạng." Phương Hàn không có chút nào muốn dừng tay, t
-
hello veedub, this problem just happend to my VR6, like you i thought it was the battery so i bought i new one, but that made no difference, after a while of looking under the bonnet checking all the usual parts but to no avail, i looked in the fuse box and one of the big black fuses no. 21 i think had managed to pull itself out.(don't know how?) I pushed it back in then it started first time. At first it was a bit ropey but the next day it was running perfect. hope this helps. Ian.
-
CAT itself is fine just the heats shield is falling apart, looks like i will have to try and squeeze underneath with a jubilee clip. thanks for the advice everyone the cheque is in the post VR6. :)
-
Hi folks i need a bit of help, i need to replace the heat shield that goes on the CAT, VW in woking have just quoted £400, does anyone know where i could pick one up myself. I have tried GSF and euro but no luck. any help would be greatly appreciated. Thanks, Ian.
-
I've had 140 from mine (private road obviously) felt good at the time quite smooth, 150 is definatley possible :D
-
Cheers DaveyBoy, will keep that in mind 30mm should be enough with 17's i think. Nice pic fella.
-
Hopefully this post has worked. The last one i had a bit of trouble with. Just here to say that i've just purchased a VR6 and i'm lovin' it :D . The only thing is, that it needs to be a bit/lot lower, I currently have koni suspension which i would like to keep, will this be a problem? any feed back would be greatly recieved.
