seafar99

:thumbleft:

Dragon Green I'll get the repair kit posted tomorrow,

PM on it's way,thanks.

Yes late type,

Hofmeister for the headlight protectors ( PM'd )

Sold my corrado so these are no longer needed, Prices are including delivery. Only these left, will listen to offers. ------------------------------------------------------------------------------------------------------------------------------------------------------- VW Passat Rear De-locked Door Handles etc. Condition/ Very Good, £43 Delivered --------------------------------------------------------------------------------------------------------------------------------------------------------

SOLD. For Sale....*£4750 Genuine BBS rs 301 16" Alloys 9" Rear 8" Front Custom adaptors to adapt from 4x100 > 5x114.3 ordered from G23 Engineering and also brand new BBS Black and gold Badges AP Coilovers with new genuine top mounts & bolts front & rear G60 front callipers painted and Tarox 40 groove discs fitted with new pads: Ov Engine from MK4 Golf 1.8T Anniversary Edition was fitted having covered only 22,000 miles (Cambelt kit & water pump and fitted the car at this point was showing 129680 miles.Now showing 138850) Qpeng engine management kit( ECU, Down Pipe & Modified engine Loom ) Two Boost settings switchable via switch on dash. Full Stainless Exhaust made with 304 grade stainless , joints welded with stainless wire. A universal intercooler was bought and the right side outlet modified and relocated to upper right corner for pipe access: All pipework for intercooler is Samco classic clamped with Mikalor stainless clamps Front engine mount for the car was exchanged for a Vibratechnics and the rear mount and gearbox mount were replaced with genuine G60 items. Shallow sump fitted to allow floor clearance with genuine short turbo oil line. Custom boost pipework made from Stainless 304 grade pipe sourced from OJZ engineering painted with Wrinkle finish paint. ECU relocated to raintray and mounted where original 16v ecu was. 3 wires required for Qpeng ECU, Live, Earth, Tacho ( all should still be labelled ) Remaining fuel and water pipework re-fitted fresh G12 non diluted coolent used New genuine VR6 clutch and pressure plate fitted along with new Genuine release bearing to original 16v Flywheel. Clutch and brake fluid all replaced with DOT4 4 new coils fitted. Front wheel arches Rolled Rear wheel arches rolled and Pulled slightly, but original shape retained so that it would be noticed. Aerial hole plated welded and filled, now has an interior hidden aerial. Genuine US rear bumper fitted (Doesn’t have towing eye hole) Retford Autofinishers (Lincolnshire) did the paint finish 2 years ago. Recaro "Fishnet" Seats with matching trim Sparco Suede steering wheel Sony head unit with USB & IPOD connects. YUASA Battery fitted last year It's also got Remote Central Locking Lots of history, bills & reciepts etc. ALL ELECTRICS WORKING, sunroof tilt & slide. Thats about everything Price* £4750 (car is located in central belt SCOTLAND ) Telephone - 07986200594 Someone has asked for some recent photos these following photos were taken on the 20th July 2013 @ Knockhill Paddock. M.O.T Mileage 10/8/2010 - 134720 1951 miles 26/8/2011 - 136671 1343 miles 31/8/2012 - 138014 836 miles 16/8/2013 - 138850 Which makes 4130 miles since 10/8/2010 .

Nice to meet up today,your car's going well, took a few photos.

Coullstar, If your on track can I bring my crash helmet for some Passenger laps, hope to be up there for 10ish. Car is washed, fuelled and camera at the ready. Two Corrados is the most I've seen together at any meet lately in Scotland. Craig.

Weathers looking good as well, hopefully not to hot though. Whos still coming? Might be space in the main bit beside the cafe but if not there is usually space down at the hairpin. I'm still coming

Heading down to this tomorrow, anybody else from here going?

Great work once again!

Sounds good to me

Now that spring has dare I say it,finally arrived, is there any appetite for getting a meeting organised?