gazyork
Members-
Content Count
26 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by gazyork
-
ah right many thanks was just a bit baffled by what it was. :scratch:
-
after getting my g60 running pretty well at the mo. well better than it not starting or ticking over lol i have seen a part and i am unsure if there should be another wire to it pics attached, thanks guys [ATTACH=CONFIG]56937[/ATTACH] [ATTACH=CONFIG]56941[/ATTACH]
-
Well it starts do it was the relay. But still running rough do you think it might need the co setting with the ECU been from a different car? Or maybe the blue temp sensor.
-
everything was working before the ecu was changed over after we found out the old ecu was shot. could really do with a company that will build a custom ecu for me think that might be best
-
Will check that when I have put the relay in
-
no the problem i had was the car was over fueling and running rough so i sent the ecu away to be tested and then the company said oh it cant be repaired to badly damaged. so i sourced another one from germany put it in the car and it just turns over and wont fire. even with the old one put back in it wont fire but it used to before,
-
Cheers for that
-
Cheers I hope so
-
put the new ecu and nothing the car just turns over and wont fire. back to the drawing board
-
cheers guys thats what i thought it was a straight swap
-
i have just got a new ecu from gemany for my g60 the bosch and digifant numbers are both exactly the same. will it be a straight swap over to get her running? the guy at the garage where the car is was going on about immobilisers and maybe have to reprogram the ecu. but i thought if the numbers were all the same it was a straight swap. am i correct?
-
cheers already found one and quite cheap to. thanks for your help steveo29
-
hi guys i am looking for a corrado g60 ecu 0261200346 037906022 cp can anyone help cash waiting 07530 188713
-
i did put some in on my way to the garage will wait til my ecu is tested and take things from there one thing at a time but think will fill her up with fresh fuel.
-
bought the car like it its been stood for 10 months. when i took it to the garage last week for the first ten mins it ran so bad it was untrue and would only do about 15 to 20 mph. then after i pulled up and it stalled i started it up again and it set of like a scolded cat and drove fine for the next 7 miles to the garage. which prob points to the blue temp sender. the garage had it in and not sure what they tried but he said the car gets better as it seems to warm up. i really want to get it running as i got it for a snip and the car is in fab condition. but if not it will be stripped and sold as parts. i will double my money anyway.
-
no not checked them the ecu is away getting checked then once its back will check those next.
-
thanks for that. will see what the ecu testing comes up with and take it from there. thanks again for your help,
-
cheers for the help guys ecu has been packed up ready to send to get checked. will check all earth connections
-
its got a brand new battery fitted think it might have spiked the ecu when when they jumped it off
-
does this means the ecu needs to be reset? would this cause the car to run like it does poor idle and missing? thanks steveo29 for your help
-
my g60 is running very rich and lumpy gets better when it gets warm. the previous owner jumped the car off loads of times as the battery had a dead cell. so could this have spiked the ECU and this is what is causing the problem?
-
G60 wont idle need to keep it reving, it used to be fine help!!!
gazyork replied to gazyork's topic in Engine Bay
well come the weekend hopefully i can try out a few of the suggestions from some of the other posters i just hope its a simple fix. the previous owner put the engine in and was running fine, thanks again guys for all your help, :thumb right: -
G60 wont idle need to keep it reving, it used to be fine help!!!
gazyork replied to gazyork's topic in Engine Bay
[ATTACH=CONFIG]52793[/ATTACH] hopefully there is a pic to view there is the block connector and two wires also where the hell do they go. -
G60 wont idle need to keep it reving, it used to be fine help!!!
gazyork replied to gazyork's topic in Engine Bay
thanks for the help guys like i said its been running fine but stood for a while then a friend said oh i will have a look but not sure if he has made it worse i have just noticed a block connector and wire that i dont know where they go. will post a pic and see if anyone can help. -
G60 wont idle need to keep it reving, it used to be fine help!!!
gazyork replied to gazyork's topic in Engine Bay
Thanks for the help guys will check all that first. It has run fine then its been parked up for a while a friend had a look not sure if he knew to much. Hope he has not unplugged the isv a fried it.