Jump to content

evoblade

Members
  • Content Count

    23
  • Joined

Community Reputation

0 Neutral

About evoblade

  • Rank
    Newbie
  1. http://biareview.com/ http://anztheme.com/ dịch vụ thành lập doanh nghiệp tư vấn luật dịch vụ kế toán trung tâm kế toán "Chàng còn không đi?" Nhìn Trần Duệ không động đậy, tiên nữ long tiểu thư không cao hứng nhìn hắn một cái.

    (Bổn tiểu thư tức giận! )

    Tuy nói tâm nữ nhân như kim đáy biển nhưng Trần Duệ và Lola cũng tính là vợ chồng đã lâu, tự nhiên hiểu rõ tính tình của nàng. Hắn ha ha cười khẽ, ôm nàng vào trong lồng ngực. Ngay sau đó là một nụ hôn sâu khiến tiên nữ long tiểu thư tâm hoa nộ phóng, gần như không thở nổi.

    "Lola, có chút chuyện lần sau lại nói, trước hãy nhận lấy lễ vật ta tặng cho nàng đã." Trong tay Trần Duệ đã có nhiều hơn một chồng tinh thạch. "Xem đây là cái gì?"

    "Quang nguyên tố thật n

  2. evoblade

    VR6 Exhuast

    I have just oticed that my Exhuast is blowing badly from the CATsection backwards. Can anyone recommend a decent cat back system. VW want over £500 for the parts alone. Has anyone any experiance of Mongoose or Miltek. Do they bang on the rear axle when fitted :?:
  3. evoblade

    VR6 problems

    I have tried pulling fairly hard and she does not want to shift. I try pulling even harder. When replacing the unit do you ned to access the water pump or xcan it be fitted in situ??
  4. evoblade

    VR6 problems

    Hi I was trying to replace the oil cooler on my VR6 yesterday and in removing the hoses that run from the cooler to trhe engine block and plattic feed pipe, i managed to snap the tube clean off the little stub outlet that is an integral part of the large plastic tube that runs across the engine from the water pump to the thermostat housing. Doues anyone know once the thermostat block housing is removed from the engine how the large plastic pipe is removed from the water pump?? :x
  5. I have had a mate chuck it onto the VAG machine and it comes up with fault code 00276, which apparently is a left rear abs outlet valve. I guess this indicates a possible problem withthe ABS modulator
  6. Hi Everyone I hope someone can help with my problem. I have a 1994 VR6. I had a new clutch fitted a month ago and since then the ABS light comes on all ther time and will not turn off. I have taken out and cleaned all the sensors without success. Can anyone help??? :(
  7. Do you know if this is a replaceable part or would it be a complete new alternator assembly :D
  8. I have noticed over the lkast week that when my VR6 returns to the tick over the lights dim significantly untill the engine is reved again. When i got to work today i could hear the battery fizzing and it looked as though acid had escaped and sprayed over some of the engine parts. Can anyone help! Is my problem stemming from the alternator overcharging the battery?
  9. Can anyone out there give me advice on how difficult it is to replace both the master and slave cylinders on the clutch unit of a VR6 :?:
  10. evoblade

    VR6 ABS Problem

    The ABS light on my VR^ keeps coming on. A mate of mine hooked it up to the VW machine and it showed a fault code. The code is 00276 and says Left Rear ABS outlet valve. Does anyone know how this can be fixed or is it a complete replacement unit that will be needed :?:
  11. evoblade

    Sticky clutch

    The clutch on my corrado vr6 sometimes sticks and does not come fully back up. The biting point is very low to the floor. This is sometimes made better by pumping the pedal slightly. My ABS light comes on as well for no explained reason. Usually goes out again once the ignition is turned off and on again. Fluid levels are all ok with no apparent leaks. Can anyone help :?:
  12. evoblade

    Please Help

    Cheers for the reply. Are they easy parts to get to? Someone told me that one of these parts is plastic and is notorious for failing. Is this the thermostat housing or the pump housing
  13. evoblade

    Please Help

    My 1994 VR6 has been loosing coolant from the header tank over the last 3 weeks. The header tank would run dry after about 500 miles. there is no water in the oil and visible signs of water leaking in the engine bay. Have checked pump and hoses and all are ok. I jacked the car up on the drivers side this morning so that it was leaning at about 30 degrees and ran the engine up. At full temperature a small jet of water was visible from under the coil pack. can anyone help with what this could be? :shock:
  14. evoblade

    VR6 foglight

    Hi mate The details of GPC did not comw out in the text. Any chance of a contact number for them
  15. evoblade

    VR6 foglight

    Have you got the contact details for GPC?
×
×
  • Create New...