johnmac
-
Content Count
16 -
Joined
-
Last visited
Everything posted by johnmac
-
Cheers for the reply, So if i use old type spring plates i should be ok?
-
Hi folks, Need some help, i bought an H&R cup kit for my VR6, they came with green springs is this correct? When trying to build them i bought new spring plates for a vr6 but the spring plates are to small and they go down the spring, any ideas? Thanks John
-
Has anyone got these two parts 535827769 (pressure plate) and 535857145 (bungs) any help would be great. Thanks John
-
Alright everyone, i need some help to find out what strut brace will fit my VR6, tried a Wiechers didn't fit, tried a neuspeed and that wont fit either, anybody got any ideas? I am wanting a steel one. Thanks
-
Is Peloquin not only a LSD?
-
Hi all, I have got my gearbox out of my VR6 just now to fit a longer 5th gear and was wondering if its worth getting a quaife ATB diff? Are they any good? and they worth the cost? Its going to be a daily driver and for putting the foot so i want it to handle well but still smooth. Any advice would be great. Thanks John
-
Thanks for the reply folks, I will try and keep yous up to date with my progress.
-
Alight folks, I am after some advice, I just bought some headlight adjusters and the loom to the fuse box. The switch hasn't got the wiring. its a 1994 vr6 and i wanted to know if i will need to make some wiring from the switch to the fuse box? Also where about in the fuse box do i wire the loom up too? Any help would be great. Cheers
-
Sorry for the late reply, i think they are off a seat leon cupra r.
-
Alright, cheers for the advice, thanks for the offer but I have black diamonds ready to go on just haven't fitted them.
-
Alright everyone, I am doing up one of my corrado's and wanted some advice, its a 1994 vr6 with abs and i am putting brembo 4 pots with 323mm disc's on the front and 256mm vented rear's. Will my brake master cylinder and servo be alright? If not what are my options? Cheers John
-
I will try abit wire the morn and see if it works. Thanks for the help :thumbleft:
-
I have another abs ecu on its way,the brown wire is in bad nick might have to run a new in, Thanks for help
-
Thanks for the help guys ---------- Post added at 6:03 PM ---------- Previous post was at 5:53 PM ---------- Hi all, found 3 relays behind the glove box. 2 with fuses 1 is 179 and the other is 79, the one with out a fuse is 179. the 79 with a fuse has a brown wire broken is this to do with my abs light or is it something else?
-
Thanks i, just seems strange no link at all, been seaching for a week or so on here but came up with apart maybe faulty abs ecu. Thank you for the welcome aswell.
-
Hi all, I was wondering if anyone could help me, my abs light stays on, tried VAG-CO0M (cheap one off ebay, it worked fine with my other corrado and connects to engine codes) but wont link, tried changing the latency setting and nothing, any would be great.