Jump to content

ChargerCharger

Members
  • Content Count

    34
  • Joined

Everything posted by ChargerCharger

  1. Hey man , I'm after some little parts for my corrado can you help ? If you open your fuel flap , there's a rubber seal thing that goes round the bodywork ? I need that as mines go missing since being painted . Also , in the same place there's a piece of trim plastic I think , that goes into a square when the fuel fla is shut ? It holds it up a bit to align with the body work . Hope that makes sense !
  2. Hey man , I'm after some little parts for my corrado can you help ? If you open your fuel flap , there's a rubber seal thing that goes round the bodywork ? I need that as mines go missing since being painted . Also , in the same place there's a piece of trim plastic I think , that goes into a square when the fuel fla is shut ? It holds it up a bit to align with the body work . Hope that makes sense !
  3. Oh right so probably not what I'm after , what make do other people recommend ?
  4. Hi guys . I'm after a new exhaust system for my vr6 as the stock one has seen better days . I'm after a jetex system have found a well priced system , It's a non resonated cat back system , my questions is would it be very noisey with no Middle Silencer ? . It will have 2 but not the 1st straight silencer which is normally straight after the cat . I don't want it too loud , Adam
  5. As above ! Mines currently in body shop and this panel was broken when removing. Has anyone got one for me :)
  6. Anybody sort me out ? After a set , seen a few recently sell on eBay refurbished For under £200 so hoping some has some cheap wheels needing work ? Let me know , Based in sussex
  7. Ok not to worries on wheels , Got seals now but thanks
  8. Thanks for your help. Just ordered both , bloody expensive lol Be worth it though
  9. Sod it , cara being painted soon so needs them , Does that site sell both drivers and passengers ?
  10. Can't really justify that price :(
  11. Hello , Do you have the drivers window scraper seal . Sits between glass and the door ? The exterior one . Also how much for 4 standard vr6 speedlines . Without tyres if possible .
  12. Hi all , I'm after a drivers side window scraper seal . It goes between the glass and door panel on the exterior of the door , mines had it and I need a replacement . Can anyone help me out please . Adam
  13. Hello guys I'm after some advice as my corrado vr6 is having troubles starting especially when warm . It can turn over for 10-20 seconds sometimes before firing , it does always start eventually but isn't ideal ! I've replaced the following : Starter ECU Relay Ignition switch . All vag parts ^ I've had a mechanic look over the car but they said it could be the relay which I replaced but still no luck :( The car does have a sticky ingnition barrel sometime , takes a few secs for key to turn but this isn't all the time . The cars first start is fine it's mainly when it's warm or been stop started quickly ? Please anyone have any suggestions ?
  14. Hello all , I've recently bought a vr6 corrado and have a list off things I want to fix on it , as with most corrados it's got a good things wrong . Firstly is the abs light is on , I've had it plugged in by a friends scanner and the code 00276 - abs outlet valve , rear left . Had come up , guessing this is a fault within the actual pump ? What's the best course off action ? Can anything be done to my pump or is a second hand unit required ? Secondly , I have to shake the key about to get the car to go to the ignition stage , then it will fire . Sometimes takes a minute or so to get this to happen . Is this common on corrados ? I want to use the Car and don't want to be let down , so is this a ignition switch or barrel fault ? Another scan on the ecu gave the code 171978 - P1570 and was to do with immobiliser ? Many thanks in advance :)
  15. Thanks , looks like the yellow is the one I need . Anyone know how I test the water gauge inside ?
  16. Hello all . I want to test my water temp sensor and make sure My vr6 water temp gauge works . Out off the 3 which is the corrado sensor . I have a yellow with 4 wires , blue with 2 and a black with 2
  17. How much for the exhaust ? Also I'm after 2 scraper seals if there excellent , and don't let water in . It's the seal that goes between the glass and door on the outside off the door :)
  18. Yeah think mine has been pulled up a little so don't sit in properly . If TPS sell them ill get a price , can imagine there expensive ?
  19. Ah that's a shame :( Apprantly there called scraper seals . There on the exterior
  20. Hello there . Dows anyone have the seals that run between the window and door , I'm after both sides if they are in excellent condition and didn't let water in when fitted to your car . If you have them please let me know as my corrado has a leak :( . Many thanks Adam
  21. Can you pm

    Me your number , interested in your corrado

  22. As above after some Front black leather seats for my corrado :) Based in sussex so close as possible
×
×
  • Create New...