dannyboi
Members-
Content Count
27 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by dannyboi
-
in need of some 4x100 15mm hub centric spacers with longer bolts please
-
thanks
-
G60 | red | watton norfolk Price:SOLD SOLD SOLD Description: Really dont wanna sell this but need the money to get my van painted its a 1991 on and H reg Really nice car to drive has the power too from the 1.8 160bhp supercharged engine Tax till end may mot till october its totally standard that much even the spare wheel is the same, all have excellent tyres and wheels are very good too, It has a 90mm front splitter, its done (are you ready) 183k its had a service and the supercharger was done last year (by previous owner) have the old bits it has a little hole in the drivers seat bolster no bigger than a 50p n/s/r wheel arch has minor damage (see photo) few other little marks as to be expected for a 22 year old car it has a spare ECU that the previous owner was going to get remaped/chipped but didnt in the end drivers door handle has decided to stop working on the outside (its the pin in the handle not pushing the release down) just needs a new handle or repair kit it also has an starting problem , it will always start just takes 10-15 seconds,you chaps have told me its the coolant temperature sensor, which means (for the people who dont no) the coolant temp sensor tells the ECU when the coolant is cold and so tells the cold start injector to fire on start up, which should fire more fuel into the inlet, (this is not expensive to replace about £20 and easy to do) just haven't the time and its just sitting there it also has an amp and 6x9s in the parcel shelf, central locking and yes the spoiler does still go up and down, the headlining has also started to sag in places, Windscreen also has a crack at the bottom, think thats about it looking for 1500 may take less for quick sale as ive lost interest in her and need my van painting [/img][/img][/img]
-
hi chaps how can i put my G60 up forsale on here as its not letting me and i cant post on anything forsale either, think i read on here somewhere about giving a donation, how do i do that if thats what i need to do thanks
-
i thought it was working fine if it did that or am i being dump
-
dont no much about corrados so where would i find this thanks ---------- Post added at 9:16 PM ---------- Previous post was at 9:13 PM ---------- na i got it from GSF car parts, dunno what it measures but when it was running i disconnected it and the revs dropped, reconnected it and it was running as before, if that makes sense and help
-
right managed to get the blue temp sensor today and fitted it :) but the problem is still there :(
-
i need some help too on this ive got the same problem with my vr6, that struggles to idle when cold but even when warm it only idles at 650-700, also if im driving along when i change gear it sometimes revs by itself between 2-3k up and down? to stop it i have to rev it over 3000 and it will then go back to idling at 650-700 before all this happened it would run fine and idle at 900 when cold no problems thanks
-
How old are you, and how long have you had your Corrado/Corrado's?
dannyboi replied to Overmind's topic in General Car Chat
25 had my G60 about 4 months, got it on a whim in p/x for my mk1 caddy, think it needs more power oh -
Thanks ill give it ago when I get time
-
yep thats deffo my problem, anyone know how to get the water pump out?
-
same noise as mines making, ive just took the tensioner off and that all seems fine, theres no noise coming from the pulley onit, how ever the coolant pump pulley is wobbly and all the bolts seem tight, could this be the problem as it does make some noise when u try turning it by hand?
-
Think this is what's just happened to mine, does it also control the idle? I've read the link, where can I get the bearings from?
-
Ok where could I get or is the best place to get a blue temp sensor from and does anyone know the part no
-
ive tried starting the car this morning with the blue temp sensor off and it did start how ever a few minutes later i tried it again and it wouldnt start with it disconnected i then plugged it in and it statrted but with the problem still there. ive looked at the vacuum hose from the throttle body to ecu and it all seems fine, if i disconnect it while the cars running you can her a change in it running then as soon as you connect it back up it goes back to normal
-
ill see if i can get alook at it today, ill get a friend to check the multimeter at the weekend
-
And what does it mean if it does or doesn't
-
It doesn't matter in the cars left overnight or not really its a pig to start even when left for a few hours
-
Well I tried starting it and then disconnecting the blue temp sensor and the revs drop,
-
ok then ill try a multimeter first, what should it be, ive also just been told that if i start the G60 and disconnect it the revs will drop if its working? is this correct
-
what do u mean by read the resistance across the 2 pins
-
Where would I find this?
-
hi chaps hope you can help me out here.... my G60 corrado has a starting problem, when you go to start the car it takes forever to start, its turning over but just takes about 10-15 seconds to start up, and when it does start theres a strong smell of fuel? the plugs and distribution cap have all been checked and seem fine, ive been told it could be the fuel filter? but not looked into it yet any help would be great chaps ---------- Post added at 1:16 PM ---------- Previous post was at 12:30 PM ---------- sorry forgot to add once you get it started if u leave it running for a couple of minutes then turn it off, then try and start it, it starts fine like it should
-
part number for the washer is 068 105 193 A
-
ill get some picture up soon